On Sunday 20 January 2008 09:50:36 am Jeremy Chadwick wrote: > On Fri, Jan 18, 2008 at 10:35:21AM +0100, Ferdinand Goldmann wrote: > > Jeremy Chadwick wrote: > >> You'd be best off with RELENG_7 and not 6.3, but yes, the controller in > >> question should work on RELENG_6 and RELENG_6_3. > > > > Very well, seems like I am going to give RELENG_7 a try then. > > Thanks to everyone who replied! > > Another user just posted to -stable about problems with these Dell > machines and PERC6. I'm not sure if you're subscribed to -stable or > not, so here's the thread: > > http://lists.freebsd.org/pipermail/freebsd-stable/2008-January/039791.html
The problem folks are having are with using volumes greater than 1 TB. The BSD label cannot handle such large disks. Instead, if you are just using the disk for data you can newfs /dev/mfid1 directly and use it as a filesystem, or if you need to partition the disk you can use gpt(8) to do so. If you need to boot from such a large disk you will need to use the GPT boot code in HEAD (I will backport it to 6.x and 7.x soon). I've successfully used it to boot on 2 TB mfi(4) volumes. Unfortunately sysinstall doesn't support GPT at all, only the older MBR + BSD label method. Note that this problem has nothing to do with mfi(4) at all, but it is a limitation of the BSD label + MBR that applies to any volume >= 2 TB. -- John Baldwin _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"