On Wed, Apr 23, 2008 at 12:13:44AM +0400, pluknet wrote: > On 22/04/2008, Mike Tancsa <[EMAIL PROTECTED]> wrote: > > At 02:00 PM 4/22/2008, Arno J. Klaassen wrote: > > > > > > > > > > Are you using the latest RELENG_7, or at least the latest version of > > > > nfe thats in RELENG_7 ? > > > > > > > > > Think so : > > > > > > > OK, and it is the latest RELENG_7 ? Or just the if_nfe.c file has been > > manually updated ? Also, you are using ULE or the 4BSD scheduler ? I still > > have 4BSD on the box I am testing on. > > Hi, I have the same problem with data corruption (with nfe on nfs server > side), > particularly when transferring large files. > Maybe this is somehow associated with the topic. > > My simple test case: > truncate -s 1000m bigfile > ^^ here I get zero-filed file > cp bigfile /nfs/mounted > ^^ here I get not-at-all-zero-filed file, after uploading to nfs server > > I looked at the corrupted file. It contains a few ranges, filed with > non-zero bytes: > equal to zero? real 4-byte value offset > ====================================== > not equal 1200355616 at pos=38797316 > ... <-- this range contains per-4bytes garbage, omit > not equal 3879749905 at pos=38813696 > > not equal 161160732 at pos=45613060 > ... <-- ditto > not equal 575257183 at pos=45629440 > > not equal 1943682165 at pos=59768836 > ... <-- ditto > not equal 2843639625 at pos=59785216 > > not equal 2653910121 at pos=60293124 > ... <-- ditto > not equal 3462830780 at pos=60309504 > > Some info: > > nfs server on 8-CURRENT as of Apr 17 > nfs client on 7.0-STABLE as of Apr 12 > > dmesg | grep nfe > nfe0: <NVIDIA nForce2 MCP2 Networking Adapter> port 0xe000-0xe007 mem > 0xe2001000-0xe2001fff irq 20 at device 4.0 on pci0 > miibus0: <MII bus> on nfe0 > nfe0: Ethernet address: 00:04:61:6c:76:b1 > nfe0: [FILTER] > nfe0: tx v1 error 0x6001 > nfe0: tx v1 error 0x6001 > nfe0: tx v1 error 0x6001 > nfe0: tx v1 error 0x6001 > nfe0: tx v1 error 0x6001 > nfe0: tx v1 error 0x6001 > nfe0: tx v1 error 0x6001 > nfe0: tx v1 error 0x6001 > nfe0: tx v1 error 0x6001 > nfe0: tx v1 error 0x6001 > nfe0: tx v1 error 0x6001 > nfe0: tx v1 error 0x6001 > ^^^
I'm not sure it's related with data corruption issue but 0x6001 would mean Tx underflow error. I recall these Tx errors were seen on nfe(4) if negotiated speed/duplex does not match with link partner or MACs. Does link partner also agree on speed/duplex settings of nfe(4)? What PHY driver nfe(4) use? > This appears while cp'ing file to server. > (btw they do not appear with disabled polling, probably it's an another > issue) > > vmstat -i | grep nfe > irq20: nfe0 ohci0 1 0 > > nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=48<VLAN_MTU,POLLING> > ether 00:04:61:6c:76:b1 > inet 192.168.200.137 netmask 0xffffff00 broadcast 192.168.200.255 > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > I can reproduce it regardless polling presence. > > [EMAIL PROTECTED]:0:4:0: class=0x020000 card=0x10001695 > chip=0x006610de > rev=0xa1 hdr=0x00 > -- Regards, Pyun YongHyeon _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
