On Tue, Jul 01, 2008 at 12:32:04PM +0200, Krzysztof J??druczyk wrote:
> Hi,
>
> Pyun YongHyeon wrote:
> >The 88E8062 support wasn't tested due to lack of hardware and I just
> >copied the device id from myk driver. Would you show me the output
> >of "devinfo -rv| grep oui" ? Also it would be better if I can see
> >verbosed boot message.
> >
>
> Here you go:
>
> # devinfo -rv | grep oui
> e1000phy0 pnpinfo oui=0x5043 model=0x9 rev=0x1 at phyno=0
> e1000phy1 pnpinfo oui=0x5043 model=0x9 rev=0x1 at phyno=0
> inphy0 pnpinfo oui=0xaa00 model=0x15 rev=0x4 at phyno=1
>
> And dmesg with '-v' in boot.config and 'verbose_loading="YES"' in
> loader.conf:
>
Would you try attached patch?
The patch is just for checking code path of fiber media.
Btw, it looks like you have dual port controller, right?
--
Regards,
Pyun YongHyeon
--- sys/dev/mii/e1000phy.c.orig 2007-11-21 14:51:55.000000000 +0900
+++ sys/dev/mii/e1000phy.c 2008-07-02 09:57:39.000000000 +0900
@@ -148,10 +148,13 @@
esc->mii_model = MII_MODEL(ma->mii_id2);
switch (esc->mii_model) {
case MII_MODEL_MARVELL_E1011:
- case MII_MODEL_MARVELL_E1112:
if (PHY_READ(sc, E1000_ESSR) & E1000_ESSR_FIBER_LINK)
sc->mii_flags |= MIIF_HAVEFIBER;
break;
+ case MII_MODEL_MARVELL_E1112:
+ /* XXX Should have a way to get instance info. */
+ sc->mii_flags |= MIIF_HAVEFIBER;
+ break;
case MII_MODEL_MARVELL_E3082:
/* 88E3082 10/100 Fast Ethernet PHY. */
sc->mii_anegticks = MII_ANEGTICKS;
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
