On Wednesday 11 February 2009, Hiroharu Tamaru wrote: > Hi, Hans > > > > > This is a known issue, see: > > > > http://wiki.freebsd.org/USB > > This worked very well. Thanks. > I assume it will be committed to the tree sometime near > in the future, right?
I suspect so. > > > > > > ugen3.3: <ASIX Electronics> at usbus3 > > > axe0: <ASIX Electronics AX88178, rev 2.00/0.01, addr 3> on usbus3 > > > axe0: PHYADDR 0xe0:0x18 > > > miibus0: <MII bus> on axe0 > > > ciphy0: <Cicada VSC8211 10/100/1000TX PHY> PHY 24 on miibus0 > > > ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > > > 1000baseT-FDX, auto ue0: <USB Ethernet> on axe0 > > > ue0: Ethernet address: 00:90:cc:xx:xx:xx > > > ue0: link state changed to DOWN > > > ue0: link state changed to UP > > > > > > > Turn on debugging: > > > > sysctl hw.usb2.axe.debug=15 > > > > And repeat test. > > with hw.usb2.axe.debug=15, I have: > > ugen3.3: <ASIX Electronics> at usbus3 (disconnected) > pid 3244 (dhclient), uid 65: exited on signal 11 > ugen3.3: <ASIX Electronics> at usbus3 > axe0: <ASIX Electronics AX88178, rev 2.00/0.01, addr 3> on usbus3 > axe0: PHYADDR 0xe0:0x18 > miibus0: <MII bus> on axe0 > ciphy0: <Cicada VSC8211 10/100/1000TX PHY> PHY 24 on miibus0 > ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto ue0: <USB Ethernet> on axe0 > ue0: Ethernet address: 00:90:cc:f7:bc:2e > ue0: link state changed to DOWN > ue0: link state changed to UP > > The hardware is a PLANEX GU-1000T ethernet adapter. > > What can I do now? Does netstat indicate any receive errors on the AXE interface? netstat -i Maybe "Pyun YongHyeon" should have a look at this. And you are running the latest current? --HPS _______________________________________________ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"