On Monday 21 September 2009 20:28:58 Pierre-Luc Drouin wrote:
> Hans Petter Selasky wrote:
> > On Monday 21 September 2009 19:52:13 Pierre-Luc Drouin wrote:
> >> Hans Petter Selasky wrote:
> >>> On Monday 21 September 2009 19:29:10 Pierre-Luc Drouin wrote:
> >>>> Hans Petter Selasky wrote:
> >>>>> On Monday 21 September 2009 03:44:25 Pierre-Luc Drouin wrote:
> >>>>>> Hi,
> >>>>>>
> >>>>>> I am also having troubles with the uftdi driver on 8.0-BETA4.
> >>>>>> I am trying to use a fan controller (mCubed bigNG) that uses a
> >>>>>> FT232BL chip and it does not seem to be responding on FreeBSD 8.0
> >>>>>> while the same code works perfectly on Linux (I have not tried the
> >>>>>> code on RELENG_7 yet but I could install it if necessary).
> >>>>>>
> >>>>>> Here is the very simple code I am using for testing:
> >>>>>> #include <termios.h>
> >>>>>> #include <fcntl.h>
> >>>>>> #include <string.h>
> >>>>>> #include <unistd.h>
> >>>>>> #include <stdio.h>
> >>>>>>
> >>>>>> int main();
> >>>>>>
> >>>>>> #define DEV "/dev/ttyU0"
> >>>>>>
> >>>>>> #define TBAN_SER_SOURCE1 0x05 /* Primary source */
> >>>>>> #define TBAN_SER_SOURCE2 0x06 /* Alternative source
> >>>>>> (miniNG...) */
> >>>>>>
> >>>>>> #define TBAN_SER_REQUEST 0x36
> >>>>>>
> >>>>>> int main()
> >>>>>> {
> >>>>>> int fd;
> >>>>>> int result;
> >>>>>> struct termios oldtio, newtio;
> >>>>>> unsigned char buf[285];
> >>>>>>
> >>>>>> printf("Opening device\n");
> >>>>>> fd=open(DEV, O_RDWR | O_NOCTTY);
> >>>>>>
> >>>>>> if(fd<0) {
> >>>>>> perror(DEV);
> >>>>>> return 1;
> >>>>>> }
> >>>>>>
> >>>>>> result=tcgetattr(fd,&oldtio);
> >>>>>> if(result<0) {
> >>>>>> perror("tcgetattr");
> >>>>>> return 1;
> >>>>>> }
> >>>>>>
> >>>>>> memcpy(&newtio,&oldtio,sizeof(struct termios));
> >>>>>> newtio.c_cflag = B19200
> >>>>>>
> >>>>>> | CRTSCTS
> >>>>>> | CS8
> >>>>>> | CREAD;
> >>>>>>
> >>>>>> newtio.c_iflag = IGNPAR;
> >>>>>> newtio.c_oflag = 0;
> >>>>>> newtio.c_lflag = 0;
> >>>>>> newtio.c_cc[VMIN] = 1;
> >>>>>> newtio.c_cc[VTIME] = 0;
> >>>>>>
> >>>>>> result=tcflush(fd, TCIFLUSH);
> >>>>>> if(result<0) {
> >>>>>> perror("tcflush");
> >>>>>> return 1;
> >>>>>> }
> >>>>>>
> >>>>>> result=tcsetattr(fd,TCSANOW,&newtio);
> >>>>>> if(result<0) {
> >>>>>> perror("tcsetattr");
> >>>>>> return 1;
> >>>>>> }
> >>>>>>
> >>>>>> sleep(1);
> >>>>>>
> >>>>>> printf("Performing initial query\n");
> >>>>>> buf[0]=TBAN_SER_SOURCE1;
> >>>>>> buf[1]=TBAN_SER_REQUEST;
> >>>>>>
> >>>>>> printf("Requesting status\n");
> >>>>>> result=write(fd,buf,2);
> >>>>>> if(result<0) {
> >>>>>> perror("write");
> >>>>>> return 1;
> >>>>>> }
> >>>>>>
> >>>>>> sleep(1);
> >>>>>>
> >>>>>> printf("Reading status\n");
> >>>>>> result=read(fd,buf,32);
> >>>>>> if(result<0) {
> >>>>>> perror("read");
> >>>>>> return 1;
> >>>>>> }
> >>>>>>
> >>>>>> result=tcsetattr(fd,TCSANOW,&oldtio);
> >>>>>> if(result<0) {
> >>>>>> perror("tcsetattr");
> >>>>>> return 1;
> >>>>>> }
> >>>>>>
> >>>>>> result=close(fd);
> >>>>>> if(result<0) {
> >>>>>> perror("close");
> >>>>>> return 1;
> >>>>>> }
> >>>>>> return 0;
> >>>>>> }
> >>>>>>
> >>>>>> It hangs while reading independently of the number of bits I am
> >>>>>> reading.
> >>>>>>
> >>>>>> Here is the output from dmesg when I load the uftdi module:
> >>>>>> Sep 20 21:31:31 ldaemon kernel: uftdi0: <USB - Serial> on usbus6
> >>>>>> Sep 20 21:31:31 ldaemon kernel: ucom_attach_tty:317: tp =
> >>>>>> 0xffffff001f12b400, unit = 0 Sep 20 21:31:31 ldaemon kernel:
> >>>>>> ucom_attach_tty:346: ttycreate: U0 Sep 20 21:31:34 ldaemon root:
> >>>>>> Unknown USB device: vendor 0x051d product 0x0002 bus uhub0
> >>>>>>
> >>>>>> Here is the output in /var/log/messages when I enable the debug
> >>>>>> output for ucom and uftdi: Sep 20 21:33:30 ldaemon kernel:
> >>>>>> ucom_open:554: tp = 0xffffff001f12b400 Sep 20 21:33:30 ldaemon
> >>>>>> kernel: ucom_dtr:827: onoff = 1 Sep 20 21:33:30 ldaemon kernel:
> >>>>>> ucom_line_state:799: on=0x01, off=0x00 Sep 20 21:33:30 ldaemon
> >>>>>> kernel: ucom_rts:838: onoff = 1
> >>>>>> Sep 20 21:33:30 ldaemon kernel: ucom_line_state:799: on=0x02,
> >>>>>> off=0x00 Sep 20 21:33:30 ldaemon kernel: ucom_break:816: onoff = 0
> >>>>>> Sep 20 21:33:30 ldaemon kernel: ucom_line_state:799: on=0x00,
> >>>>>> off=0x04 Sep 20 21:33:30 ldaemon kernel: ucom_status_change:901:
> >>>>>> Sep 20 21:33:30 ldaemon kernel: ucom_param:950: sc =
> >>>>>> 0xffffff001f12ac58 Sep 20 21:33:30 ldaemon kernel:
> >>>>>> uftdi_pre_param:653:
> >>>>>> Sep 20 21:33:30 ldaemon kernel: ucom_dtr:827: onoff = 1
> >>>>>> Sep 20 21:33:30 ldaemon kernel: ucom_line_state:799: on=0x01,
> >>>>>> off=0x00 Sep 20 21:33:30 ldaemon kernel: ucom_rts:838: onoff = 1
> >>>>>> Sep 20 21:33:30 ldaemon kernel: ucom_line_state:799: on=0x02,
> >>>>>> off=0x00 Sep 20 21:33:30 ldaemon kernel: ucom_cfg_open:520:
> >>>>>> Sep 20 21:33:30 ldaemon kernel: uftdi_cfg_open:354:
> >>>>>> Sep 20 21:33:30 ldaemon kernel: uftdi_read_callback:459: status
> >>>>>> change msr=0xf0 (0x00) lsr=0x60 (0x00) Sep 20 21:33:30 ldaemon
> >>>>>> kernel: ucom_status_change:901:
> >>>>>> Sep 20 21:33:30 ldaemon kernel: uftdi_cfg_get_status:705: msr=0xf0
> >>>>>> lsr=0x60 Sep 20 21:33:30 ldaemon kernel: ucom_cfg_status_change:887:
> >>>>>> DCD changed to 1 Sep 20 21:33:30 ldaemon kernel:
> >>>>>> uftdi_cfg_param:672: Sep 20 21:33:30 ldaemon kernel: ucom_ioctl:653:
> >>>>>> cmd = 0x402c7413 Sep 20 21:33:30 ldaemon kernel: ucom_ioctl:653: cmd
> >>>>>> = 0x80047410 Sep 20 21:33:30 ldaemon kernel: ucom_ioctl:653: cmd =
> >>>>>> 0x802c7414 Sep 20 21:33:30 ldaemon kernel: ucom_param:950: sc =
> >>>>>> 0xffffff001f12ac58 Sep 20 21:33:30 ldaemon kernel:
> >>>>>> uftdi_pre_param:653:
> >>>>>> Sep 20 21:33:30 ldaemon kernel: uftdi_cfg_get_status:705: msr=0xf0
> >>>>>> lsr=0x60 Sep 20 21:33:30 ldaemon kernel: uftdi_cfg_param:672:
> >>>>>> Sep 20 21:33:30 ldaemon kernel: ucom_get_data:1064: cnt=0
> >>>>>> Sep 20 21:33:31 ldaemon kernel: ucom_ioctl:653: cmd = 0x80047410
> >>>>>> Sep 20 21:33:32 ldaemon kernel: ucom_outwakeup:1009: sc =
> >>>>>> 0xffffff001f12ac58 Sep 20 21:33:32 ldaemon kernel:
> >>>>>> ucom_get_data:1064: cnt=2
> >>>>>> Sep 20 21:33:32 ldaemon kernel: ucom_get_data:1064: cnt=0
> >>>>>>
> >>>>>> I really need to get this working so I am ready to test things as
> >>>>>> much as I can...
> >>>>>
> >>>>> Hi,
> >>>>>
> >>>>> You need to set raw mode for the TTY device I think. Maybe Ed can
> >>>>> give you the function name you need to call to do that?
> >>>>>
> >>>>> --HPS
> >>>>
> >>>> Do I need to do something like that?
> >>>> ioctl(fileno(stdin), TIOCGETP, &tty_org);
> >>>> tty = tty_org;
> >>>>
> >>>> /* set terminal to raw mode ... */
> >>>> tty.sg_flags |= CRMOD;
> >>>> tty.sg_flags &= ~ECHO;
> >>>> tty.sg_flags &= ~XTABS;
> >>>> tty.sg_flags |= RAW;
> >>>>
> >>>> Thanks!
> >>>> Pierre-Luc Drouin
> >>>
> >>> Hi,
> >>>
> >>> You need to call this function:
> >>>
> >>> void
> >>> cfmakeraw(struct termios *t);
> >>>
> >>> --HPS
> >>
> >> Hi,
> >>
> >> it still does not work. I have added the line
> >> cfmakeraw(&newtio);
> >>
> >> just before the call to tcflush and I get the following output in
> >> /var/log/messages:
> >> Sep 21 13:38:46 ldaemon kernel: ucom_open:554: tp = 0xffffff001f12b400
> >> Sep 21 13:38:46 ldaemon kernel: ucom_dtr:827: onoff = 1
> >> Sep 21 13:38:46 ldaemon kernel: ucom_line_state:799: on=0x01, off=0x00
> >> Sep 21 13:38:46 ldaemon kernel: ucom_rts:838: onoff = 1
> >> Sep 21 13:38:46 ldaemon kernel: ucom_line_state:799: on=0x02, off=0x00
> >> Sep 21 13:38:46 ldaemon kernel: ucom_break:816: onoff = 0
> >> Sep 21 13:38:46 ldaemon kernel: ucom_line_state:799: on=0x00, off=0x04
> >> Sep 21 13:38:46 ldaemon kernel: ucom_status_change:901:
> >> Sep 21 13:38:46 ldaemon kernel: ucom_param:950: sc = 0xffffff001f12ac58
> >> Sep 21 13:38:46 ldaemon kernel: uftdi_pre_param:653:
> >> Sep 21 13:38:46 ldaemon kernel: ucom_dtr:827: onoff = 1
> >> Sep 21 13:38:46 ldaemon kernel: ucom_line_state:799: on=0x01, off=0x00
> >> Sep 21 13:38:46 ldaemon kernel: ucom_rts:838: onoff = 1
> >> Sep 21 13:38:46 ldaemon kernel: ucom_line_state:799: on=0x02, off=0x00
> >> Sep 21 13:38:46 ldaemon kernel: ucom_cfg_open:520:
> >> Sep 21 13:38:46 ldaemon kernel: uftdi_cfg_open:354:
> >> uftdi_cfg_get_status:705: msr=0xf0 lsr=0x60
> >> Sep 21 13:38:46 ldaemon kernel: ucom_cfg_status_change:887: DCD changed
> >> to 1 Sep 21 13:38:46 ldaemon kernel: uftdi_cfg_param:672:
> >> Sep 21 13:38:46 ldaemon kernel: ucom_ioctl:653: cmd = 0x402c7413
> >> Sep 21 13:38:46 ldaemon kernel: ucom_ioctl:653: cmd = 0x80047410
> >> Sep 21 13:38:46 ldaemon kernel: ucom_ioctl:653: cmd = 0x802c7414
> >> Sep 21 13:38:46 ldaemon kernel: ucom_param:950: sc = 0xffffff001f12ac58
> >> Sep 21 13:38:46 ldaemon kernel: uftdi_pre_param:653:
> >> Sep 21 13:38:46 ldaemon kernel: uftdi_cfg_param:672:
> >> Sep 21 13:38:46 ldaemon kernel: ucom_get_data:1064: cnt=0
> >> Sep 21 13:38:47 ldaemon kernel: ucom_ioctl:653: cmd = 0x80047410
> >> Sep 21 13:38:48 ldaemon kernel: ucom_outwakeup:1009: sc =
> >> 0xffffff001f12ac58 Sep 21 13:38:48 ldaemon kernel: ucom_get_data:1064:
> >> cnt=2
> >> Sep 21 13:38:48 ldaemon kernel: ucom_get_data:1064: cnt=0
> >
> > Can you try adding a delay after setting the baud rate?
> >
> > --HPS
>
> The code already sleeps for 1 second after I applying the baud rate (via
> tcsetattr(fd,TCSANOW,&newtio)). I am not sure to understand what you
> mean...
Hi,
I mean try adding some:
usleep(1000000);
To your code to see if that changes anything.
Also try reading one byte instead of 32.
Last, try adding a printout to:
src/sys/dev/usb/serial/uftdi.c
uftdi_read_callback()
and printout the actlen variable.
--HPS
_______________________________________________
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"
