Boa tarde Senhores, Alguém já presenciou este erro?
bge0: no memory for std Rx buffers Lembrando que não está configurado jumbo frames ou device pooling, já troquei switch e etc. A placa fica intermitente e simplesmente morre. Abaixo o dmesg: $ dmesg Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.1-RELEASE-p2 #1: Wed Jan 26 01:51:01 EST 2011 root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 amd64 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz (2890.83-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x106e5 Family = 6 Model = 1e Stepping = 5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 8589934592 (8192 MB) avail memory = 8235884544 (7854 MB) ACPI APIC Table: <HP ProLiant> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 ioapic0 <Version 2.0> irqs 0-23 on motherboard wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/. wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (wpi_fw, 0xffffffff80650da0, 0) error 1 ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8046cb50, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8046cbf0, 0) error 1 wlan: mac acl policy registered ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8046cc90, 0) error 1 kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard padlock0: No ACE support. acpi0: <HP ProLiant> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0 pci1: <ACPI PCI bus> on pcib1 bce0: <HP NC382T PCIe DP Multifunction Gigabit Server Adapter (C0)> mem 0xd4000000-0xd5ffffff irq 16 at device 0.0 on pci1 miibus0: <MII bus> on bce0 brgphy0: <BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce0: [ITHREAD] bce0: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (5.2.2); Flags (MSI) bce1: <HP NC382T PCIe DP Multifunction Gigabit Server Adapter (C0)> mem 0xd6000000-0xd7ffffff irq 17 at device 0.1 on pci1 miibus1: <MII bus> on bce1 brgphy1: <BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce1: [ITHREAD] bce1: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (5.2.2); Flags (MSI) pci0: <base peripheral> at device 8.0 (no driver attached) pci0: <base peripheral> at device 8.1 (no driver attached) pci0: <base peripheral> at device 8.2 (no driver attached) pci0: <base peripheral> at device 8.3 (no driver attached) pci0: <base peripheral> at device 16.0 (no driver attached) pci0: <base peripheral> at device 16.1 (no driver attached) ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xdcd01800-0xdcd01bff irq 16 at device 26.0 on pci0 ehci0: [ITHREAD] usbus0: EHCI version 1.0 usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci16: <ACPI PCI bus> on pcib2 bce2: <HP NC382T PCIe DP Multifunction Gigabit Server Adapter (C0)> mem 0xd8000000-0xd9ffffff irq 16 at device 0.0 on pci16 miibus2: <MII bus> on bce2 brgphy2: <BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus2 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce2: [ITHREAD] bce2: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2); Flags (MSI) bce3: <HP NC382T PCIe DP Multifunction Gigabit Server Adapter (C0)> mem 0xda000000-0xdbffffff irq 17 at device 0.1 on pci16 miibus3: <MII bus> on bce3 brgphy3: <BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus3 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce3: [ITHREAD] bce3: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2); Flags (MSI) pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci32: <ACPI PCI bus> on pcib3 bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xdc900000-0xdc90ffff irq 16 at device 0.0 on pci32 miibus4: <MII bus> on bge0 brgphy4: <BCM5784 10/100/1000baseTX PHY> PHY 1 on miibus4 brgphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: [FILTER] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pci34: <ACPI PCI bus> on pcib4 bge1: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xdca00000-0xdca0ffff irq 17 at device 0.0 on pci34 miibus5: <MII bus> on bge1 brgphy5: <BCM5784 10/100/1000baseTX PHY> PHY 1 on miibus5 brgphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1: [FILTER] pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 pci36: <ACPI PCI bus> on pcib5 vgapci0: <VGA-compatible display> mem 0xdd000000-0xddffffff,0xdc800000-0xdc803fff,0xdc000000-0xdc7fffff irq 18 at device 0.0 on pci36 pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 pci38: <ACPI PCI bus> on pcib6 ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xdcd01c00-0xdcd01fff irq 23 at device 29.0 on pci0 ehci1: [ITHREAD] usbus1: EHCI version 1.0 usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1 pcib7: <PCI-PCI bridge> at device 30.0 on pci0 pci48: <PCI bus> on pcib7 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PCH SATA300 controller> port 0x1830-0x1837,0x1824-0x1827,0x1828-0x182f,0x1820-0x1823,0x1810-0x181f,0x1800-0x180f irq 18 at device 31.2 on pci0 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci1: <Intel PCH SATA300 controller> port 0x1888-0x188f,0x183c-0x183f,0x1880-0x1887,0x1838-0x183b,0x1870-0x187f,0x1860-0x186f irq 17 at device 31.5 on pci0 atapci1: [ITHREAD] ata4: <ATA channel 0> on atapci1 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci1 ata5: [ITHREAD] acpi_button0: <Power Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xca000-0xcafff,0xdf000-0xdffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd: unable to set the command byte. atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to set the command byte. ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 est4: <Enhanced SpeedStep Frequency Control> on cpu4 p4tcc4: <CPU Frequency Thermal Control> on cpu4 est5: <Enhanced SpeedStep Frequency Control> on cpu5 p4tcc5: <CPU Frequency Thermal Control> on cpu5 est6: <Enhanced SpeedStep Frequency Control> on cpu6 p4tcc6: <CPU Frequency Thermal Control> on cpu6 est7: <Enhanced SpeedStep Frequency Control> on cpu7 p4tcc7: <CPU Frequency Thermal Control> on cpu7 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ad4: 238475MB <VB0250EAVER HPG0> at ata2-master UDMA100 SATA 3Gb/s ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ad6: 238475MB <VB0250EAVER HPG0> at ata3-master UDMA100 SATA 3Gb/s uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen0.2: <vendor 0x8087> at usbus0 uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 acd0: DVDROM <DV-18S-A/B.0C> at ata4-master UDMA100 SATA 1.5Gb/s SMP: AP CPU #1 Launched! SMP: AP CPU #2 <http://redmine.pfsense.org/issues/2> Launched! SMP: AP CPU #4 <http://redmine.pfsense.org/issues/4> Launched! SMP: AP CPU #6 <http://redmine.pfsense.org/issues/6> Launched! SMP: AP CPU #3 <http://redmine.pfsense.org/issues/3> Launched! SMP: AP CPU #7 <http://redmine.pfsense.org/issues/7> Launched! SMP: AP CPU #5 <http://redmine.pfsense.org/issues/5> Launched! Root mount waiting for: usbus1 usbus0 uhub2: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ugen0.3: <Avocent> at usbus0 ukbd0: <EP1 Interrupt> on usbus0 kbd2 at ukbd0 ums0: <EP2 Interrupt> on usbus0 ums0: 5 buttons and [XYZ] coordinates ID=1 ugen1.3: <ServerEngines> at usbus1 ukbd1: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> on usbus1 kbd3 at ukbd1 ums1: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> on usbus1 ums1: 8 buttons and [XYZ] coordinates ID=0 Trying to mount root from ufs:/dev/ad4s1a pflog0: promiscuous mode enabled bge0: link state changed to UP bge1: link state changed to DOWN bce0: link state changed to UP bce0: link state changed to DOWN bce0: link state changed to UP bge0: link state changed to DOWN bge0: no memory for std Rx buffers. bge0: no memory for std Rx buffers. bge0: no memory for std Rx buffers. bce0: link state changed to DOWN bce1: link state changed to UP bce1: link state changed to DOWN bce3: link state changed to UP bce3: link state changed to DOWN bce2: link state changed to UP bce2: link state changed to DOWN bge0: link state changed to UP bge0: link state changed to DOWN bce0: link state changed to UP bce3: link state changed to UP bce3: link state changed to DOWN bce3: link state changed to UP bce2: link state changed to UP bge0: link state changed to UP bge1: no memory for std Rx buffers. bge1: no memory for std Rx buffers. bge1: no memory for std Rx buffers. bge1: link state changed to UP bge0: link state changed to DOWN bge1: link state changed to DOWN ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd