O que você tunou no boot.loader ou no sysctl.conf ? Mexeu nos mbufs ? Té+
-- Eduardo Schoedler > -----Mensagem original----- > De: freebsd-boun...@fug.com.br [mailto:freebsd-boun...@fug.com.br] Em > nome de Danilo Chilene > Enviada em: segunda-feira, 31 de janeiro de 2011 13:50 > Para: Lista Brasileira de Discussão sobre FreeBSD (FUG-BR) > Assunto: [FUG-BR] FreeBSD 8.1 - HP NC107i PCIe Gigabit erro > > Boa tarde Senhores, > > Alguém já presenciou este erro? > > bge0: no memory for std Rx buffers > > Lembrando que não está configurado jumbo frames ou device pooling, já > troquei switch e etc. A placa fica intermitente e simplesmente morre. > Abaixo o dmesg: > > $ dmesg > Copyright (c) 1992-2010 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 8.1-RELEASE-p2 #1: Wed Jan 26 01:51:01 EST 2011 > root@FreeBSD_8.0_pfSense_2.0- > AMD64.snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense > _SMP.8 > amd64 > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz (2890.83-MHz K8-class CPU) > Origin = "GenuineIntel" Id = 0x106e5 Family = 6 Model = 1e Stepping = 5 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG > E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xT > PR,PDCM,SSE4.1,SSE4.2,POPCNT> > AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> > AMD Features2=0x1<LAHF> > TSC: P-state invariant > real memory = 8589934592 (8192 MB) > avail memory = 8235884544 (7854 MB) > ACPI APIC Table: <HP ProLiant> > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs > FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > cpu4 (AP): APIC ID: 4 > cpu5 (AP): APIC ID: 5 > cpu6 (AP): APIC ID: 6 > cpu7 (AP): APIC ID: 7 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > wpi: You need to read the LICENSE file in > /usr/share/doc/legal/intel_wpi/. > wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 > in > /boot/loader.conf. > module_register_init: MOD_LOAD (wpi_fw, 0xffffffff80650da0, 0) error 1 > ipw_bss: You need to read the LICENSE file in > /usr/share/doc/legal/intel_ipw/. > ipw_bss: If you agree with the license, set > legal.intel_ipw.license_ack=1 in > /boot/loader.conf. > module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8046cb50, 0) > error 1 > ipw_ibss: You need to read the LICENSE file in > /usr/share/doc/legal/intel_ipw/. > ipw_ibss: If you agree with the license, set > legal.intel_ipw.license_ack=1 > in /boot/loader.conf. > module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8046cbf0, 0) > error 1 > wlan: mac acl policy registered > ipw_monitor: You need to read the LICENSE file in > /usr/share/doc/legal/intel_ipw/. > ipw_monitor: If you agree with the license, set > legal.intel_ipw.license_ack=1 in /boot/loader.conf. > module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8046cc90, 0) > error > 1 > kbd1 at kbdmux0 > cryptosoft0: <software crypto> on motherboard > padlock0: No ACE support. > acpi0: <HP ProLiant> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > cpu4: <ACPI CPU> on acpi0 > cpu5: <ACPI CPU> on acpi0 > cpu6: <ACPI CPU> on acpi0 > cpu7: <ACPI CPU> on acpi0 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on > acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 900 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > bce0: <HP NC382T PCIe DP Multifunction Gigabit Server Adapter (C0)> mem > 0xd4000000-0xd5ffffff irq 16 at device 0.0 on pci1 > miibus0: <MII bus> on bce0 > brgphy0: <BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bce0: [ITHREAD] > bce0: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (5.2.2); > Flags > (MSI) > bce1: <HP NC382T PCIe DP Multifunction Gigabit Server Adapter (C0)> mem > 0xd6000000-0xd7ffffff irq 17 at device 0.1 on pci1 > miibus1: <MII bus> on bce1 > brgphy1: <BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus1 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bce1: [ITHREAD] > bce1: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (5.2.2); > Flags > (MSI) > pci0: <base peripheral> at device 8.0 (no driver attached) > pci0: <base peripheral> at device 8.1 (no driver attached) > pci0: <base peripheral> at device 8.2 (no driver attached) > pci0: <base peripheral> at device 8.3 (no driver attached) > pci0: <base peripheral> at device 16.0 (no driver attached) > pci0: <base peripheral> at device 16.1 (no driver attached) > ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xdcd01800-0xdcd01bff > irq 16 > at device 26.0 on pci0 > ehci0: [ITHREAD] > usbus0: EHCI version 1.0 > usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0 > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 > pci16: <ACPI PCI bus> on pcib2 > bce2: <HP NC382T PCIe DP Multifunction Gigabit Server Adapter (C0)> mem > 0xd8000000-0xd9ffffff irq 16 at device 0.0 on pci16 > miibus2: <MII bus> on bce2 > brgphy2: <BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus2 > brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bce2: [ITHREAD] > bce2: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2); > Flags (MSI) > bce3: <HP NC382T PCIe DP Multifunction Gigabit Server Adapter (C0)> mem > 0xda000000-0xdbffffff irq 17 at device 0.1 on pci16 > miibus3: <MII bus> on bce3 > brgphy3: <BCM5709C 10/100/1000baseTX PHY> PHY 1 on miibus3 > brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bce3: [ITHREAD] > bce3: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2); > Flags (MSI) > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 > pci32: <ACPI PCI bus> on pcib3 > bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem > 0xdc900000-0xdc90ffff irq 16 at device 0.0 on pci32 > miibus4: <MII bus> on bge0 > brgphy4: <BCM5784 10/100/1000baseTX PHY> PHY 1 on miibus4 > brgphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bge0: [FILTER] > pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 > pci34: <ACPI PCI bus> on pcib4 > bge1: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem > 0xdca00000-0xdca0ffff irq 17 at device 0.0 on pci34 > miibus5: <MII bus> on bge1 > brgphy5: <BCM5784 10/100/1000baseTX PHY> PHY 1 on miibus5 > brgphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bge1: [FILTER] > pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 > pci36: <ACPI PCI bus> on pcib5 > vgapci0: <VGA-compatible display> mem > 0xdd000000-0xddffffff,0xdc800000-0xdc803fff,0xdc000000-0xdc7fffff irq > 18 at > device 0.0 on pci36 > pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 > pci38: <ACPI PCI bus> on pcib6 > ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xdcd01c00-0xdcd01fff > irq 23 > at device 29.0 on pci0 > ehci1: [ITHREAD] > usbus1: EHCI version 1.0 > usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1 > pcib7: <PCI-PCI bridge> at device 30.0 on pci0 > pci48: <PCI bus> on pcib7 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PCH SATA300 controller> port > 0x1830-0x1837,0x1824-0x1827,0x1828-0x182f,0x1820-0x1823,0x1810- > 0x181f,0x1800-0x180f > irq 18 at device 31.2 on pci0 > atapci0: [ITHREAD] > ata2: <ATA channel 0> on atapci0 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci0 > ata3: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > atapci1: <Intel PCH SATA300 controller> port > 0x1888-0x188f,0x183c-0x183f,0x1880-0x1887,0x1838-0x183b,0x1870- > 0x187f,0x1860-0x186f > irq 17 at device 31.5 on pci0 > atapci1: [ITHREAD] > ata4: <ATA channel 0> on atapci1 > ata4: [ITHREAD] > ata5: <ATA channel 1> on atapci1 > ata5: [ITHREAD] > acpi_button0: <Power Button> on acpi0 > atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > uart0: [FILTER] > orm0: <ISA Option ROMs> at iomem > 0xc0000-0xc7fff,0xca000-0xcafff,0xdf000-0xdffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd: unable to set the command byte. > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > psm0: unable to set the command byte. > ppc0: cannot reserve I/O port range > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > est4: <Enhanced SpeedStep Frequency Control> on cpu4 > p4tcc4: <CPU Frequency Thermal Control> on cpu4 > est5: <Enhanced SpeedStep Frequency Control> on cpu5 > p4tcc5: <CPU Frequency Thermal Control> on cpu5 > est6: <Enhanced SpeedStep Frequency Control> on cpu6 > p4tcc6: <CPU Frequency Thermal Control> on cpu6 > est7: <Enhanced SpeedStep Frequency Control> on cpu7 > p4tcc7: <CPU Frequency Thermal Control> on cpu7 > Timecounters tick every 1.000 msec > IPsec: Initialized Security Association Processing. > usbus0: 480Mbps High Speed USB v2.0 > usbus1: 480Mbps High Speed USB v2.0 > ad4: 238475MB <VB0250EAVER HPG0> at ata2-master UDMA100 SATA 3Gb/s > ugen0.1: <Intel> at usbus0 > uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on > usbus0 > ugen1.1: <Intel> at usbus1 > uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on > usbus1 > ad6: 238475MB <VB0250EAVER HPG0> at ata3-master UDMA100 SATA 3Gb/s > uhub0: 2 ports with 2 removable, self powered > uhub1: 2 ports with 2 removable, self powered > ugen0.2: <vendor 0x8087> at usbus0 > uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> > on > usbus0 > ugen1.2: <vendor 0x8087> at usbus1 > uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> > on > usbus1 > acd0: DVDROM <DV-18S-A/B.0C> at ata4-master UDMA100 SATA 1.5Gb/s > SMP: AP CPU #1 Launched! > SMP: AP CPU #2 <http://redmine.pfsense.org/issues/2> Launched! > SMP: AP CPU #4 <http://redmine.pfsense.org/issues/4> Launched! > SMP: AP CPU #6 <http://redmine.pfsense.org/issues/6> Launched! > SMP: AP CPU #3 <http://redmine.pfsense.org/issues/3> Launched! > SMP: AP CPU #7 <http://redmine.pfsense.org/issues/7> Launched! > SMP: AP CPU #5 <http://redmine.pfsense.org/issues/5> Launched! > Root mount waiting for: usbus1 usbus0 > uhub2: 6 ports with 6 removable, self powered > uhub3: 8 ports with 8 removable, self powered > ugen0.3: <Avocent> at usbus0 > ukbd0: <EP1 Interrupt> on usbus0 > kbd2 at ukbd0 > ums0: <EP2 Interrupt> on usbus0 > ums0: 5 buttons and [XYZ] coordinates ID=1 > ugen1.3: <ServerEngines> at usbus1 > ukbd1: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> > on > usbus1 > kbd3 at ukbd1 > ums1: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> > on > usbus1 > ums1: 8 buttons and [XYZ] coordinates ID=0 > Trying to mount root from ufs:/dev/ad4s1a > pflog0: promiscuous mode enabled > bge0: link state changed to UP > bge1: link state changed to DOWN > bce0: link state changed to UP > bce0: link state changed to DOWN > bce0: link state changed to UP > bge0: link state changed to DOWN > bge0: no memory for std Rx buffers. > bge0: no memory for std Rx buffers. > bge0: no memory for std Rx buffers. > bce0: link state changed to DOWN > bce1: link state changed to UP > bce1: link state changed to DOWN > bce3: link state changed to UP > bce3: link state changed to DOWN > bce2: link state changed to UP > bce2: link state changed to DOWN > bge0: link state changed to UP > bge0: link state changed to DOWN > bce0: link state changed to UP > bce3: link state changed to UP > bce3: link state changed to DOWN > bce3: link state changed to UP > bce2: link state changed to UP > bge0: link state changed to UP > bge1: no memory for std Rx buffers. > bge1: no memory for std Rx buffers. > bge1: no memory for std Rx buffers. > bge1: link state changed to UP > bge0: link state changed to DOWN > bge1: link state changed to DOWN > ------------------------- > Histórico: http://www.fug.com.br/historico/html/freebsd/ > Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd ------------------------- Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd