10 дек. 2015 г. 17:01 пользователь "Vladislav V. Prodan" <
[email protected]> написал:
>
> Здравствуйте.
>
> В веб-режиме есть Modifying IP Access Rules, а вот через ipmitool не
нахожу, как сменить IP...
>
> Материнская плата от SuperMicro
>
> вывод ipmitool
> # ipmitool
> No command provided!
> Commands:
> raw Send a RAW IPMI request and print response
> i2c Send an I2C Master Write-Read command and print
response
> spd Print SPD info from remote I2C device
> lan Configure LAN Channels
> chassis Get chassis status and set power state
> power Shortcut to chassis power commands
> event Send pre-defined events to MC
> mc Management Controller status and global enables
> sdr Print Sensor Data Repository entries and readings
> sensor Print detailed sensor information
> fru Print built-in FRU and scan SDR for FRU locators
> gendev Read/Write Device associated with Generic Device
locators sdr
> sel Print System Event Log (SEL)
> pef Configure Platform Event Filtering (PEF)
> sol Configure and connect IPMIv2.0 Serial-over-LAN
> tsol Configure and connect with Tyan IPMIv1.5
Serial-over-LAN
> isol Configure IPMIv1.5 Serial-over-LAN
> user Configure Management Controller users
> channel Configure Management Controller channels
> session Print session information
> dcmi Data Center Management Interface
> sunoem OEM Commands for Sun servers
> kontronoem OEM Commands for Kontron devices
> picmg Run a PICMG/ATCA extended cmd
> fwum Update IPMC using Kontron OEM Firmware Update
Manager
> firewall Configure Firmware Firewall
> delloem OEM Commands for Dell systems
> shell Launch interactive IPMI shell
> exec Run list of commands from file
> set Set runtime variable for shell and exec
> hpm Update HPM components using PICMG HPM.1 file
> ekanalyzer run FRU-Ekeying analyzer using FRU files
> ime Update Intel Manageability Engine Firmware
Совсем уже обленились. http://bfy.tw/3Do2
