2015-12-10 20:22 GMT+02:00 Anton Sayetsky <[email protected]>: > 10 дек. 2015 г. 17:01 пользователь "Vladislav V. Prodan" < > [email protected]> написал: > > > > > Здравствуйте. > > > > В веб-режиме есть Modifying IP Access Rules, а вот через ipmitool не > нахожу, как сменить IP... > > > > Материнская плата от SuperMicro > > > > вывод ipmitool > > # ipmitool > > No command provided! > > Commands: > > raw Send a RAW IPMI request and print response > > i2c Send an I2C Master Write-Read command and print > response > > spd Print SPD info from remote I2C device > > lan Configure LAN Channels > > chassis Get chassis status and set power state > > power Shortcut to chassis power commands > > event Send pre-defined events to MC > > mc Management Controller status and global enables > > sdr Print Sensor Data Repository entries and readings > > sensor Print detailed sensor information > > fru Print built-in FRU and scan SDR for FRU locators > > gendev Read/Write Device associated with Generic Device > locators sdr > > sel Print System Event Log (SEL) > > pef Configure Platform Event Filtering (PEF) > > sol Configure and connect IPMIv2.0 Serial-over-LAN > > tsol Configure and connect with Tyan IPMIv1.5 > Serial-over-LAN > > isol Configure IPMIv1.5 Serial-over-LAN > > user Configure Management Controller users > > channel Configure Management Controller channels > > session Print session information > > dcmi Data Center Management Interface > > sunoem OEM Commands for Sun servers > > kontronoem OEM Commands for Kontron devices > > picmg Run a PICMG/ATCA extended cmd > > fwum Update IPMC using Kontron OEM Firmware Update > Manager > > firewall Configure Firmware Firewall > > delloem OEM Commands for Dell systems > > shell Launch interactive IPMI shell > > exec Run list of commands from file > > set Set runtime variable for shell and exec > > hpm Update HPM components using PICMG HPM.1 file > > ekanalyzer run FRU-Ekeying analyzer using FRU files > > ime Update Intel Manageability Engine Firmware > Совсем уже обленились. http://bfy.tw/3Do2 > > И что там?
# ipmitool firewall info Get Configurable Command (LUN=0, NetFn=0, op=0) command failed: Invalid data field in request Get Configurable Command (LUN=0, NetFn=4, op=0) command failed: Invalid data field in request Get Configurable Command (LUN=0, NetFn=6, op=0) command failed: Invalid data field in request Get Configurable Command (LUN=0, NetFn=10, op=0) command failed: Invalid data field in request Get Configurable Command (LUN=0, NetFn=12, op=0) command failed: Invalid data field in request # ipmitool firewall info lun 0 netfn 12 Get Configurable Command (LUN=0, NetFn=12, op=0) command failed: Invalid data field in request Commands on LUN 0x00, NetFn 0x0c support: 1e00ff1f 07000000 00000000 00000000 00000000 00000000 00000000 00000000 configurable: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 enabled: 1e00ff1f 07000000 00000000 00000000 00000000 00000000 00000000 00000000 -- Vladislav V. Prodan System & Network Administrator support.od.ua
