Simon, I can read from a USB stick without any extra tricks, as long as it is inserted before booting (which usually means I have to make sure the bios is set to boot from disk 1st; I find it easier to write the files to the Freedos disk from inside Windows, if I need to do that).
However, I'm not sure this says anything either way about networking. /Tomas On Thu, 18 Mar 2021 11:43:19 +0100, Šimon Dobeš wrote: > Hello, > Well I tried to use USB with FreeDOS. You can use USB with FreeDOS but > you need to do some things. > 1st: You need to unzip FreeDOS USB installer to USB that you wnat to > use. > 2nd: Create special folder for files you want to transfer. E.G.: > Folder named TRANSFER > 3rd: Boot from USB. > 4th: Cancel installation. > 5th: Your USB is ready to go. > Note: USB is C: and you main hard drive is D: or sometimes even E: > > I hope this will work, > Šimon Dobeš _______________________________________________ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user