Hey Scott, I'm probably assuming something incorrectly about what will be returned.
Could you show the output w/ --debug. If you can, a ps1 & ps2 output and also a "bad" case when the power cable is out. Thanks, Al On Tue, 2015-09-22 at 15:46 -0500, Scott Silverman wrote: > I tested with your latest changes, it returns: > > > supermicro:get-power-supply-status2 invalid response length: 3, > expected 4 > > > > > > > > > Thanks, > > > Scott Silverman | IT | Simplex | 312-360-2444 > 230 S. LaSalle St., Suite 4-100, Chicago, IL 60604 > > On Tue, Sep 15, 2015 at 5:50 PM, Albert Chu <ch...@llnl.gov> wrote: > On Tue, 2015-09-15 at 09:01 -0500, Scott Silverman wrote: > > I ran the command with debug, but there's no difference at > all between > > the output when the cable is plugged/unplugged. > > > > > > I've also received a follow-up from SuperMicro who tell me > the > > following should work (but they specifically say "don't use > it" > > because of some vague statement that it "could affect other > > functionality"). > > > > > > PSU1: 0x06 0x52 0x07 0xb0 0x02 0x79 > > > > PSU2: 0x06 0x52 0x07 0xb2 0x02 0x79 > > > > > > > > Returns of 00 or 02 mean good, anything else (or failed > command) mean > > bad, according to SM. > > > > > > I tested it, and I get a return of "00 00" on a good PSU1 > and a "02 > > 00" on a good PSU2. A bad PSU1 returns "4b 28". > > Hmmmm ... this is disconcerting, because you'd like some > consistent > output. > > I take it both bytes have to be 00 or 02? Otherwise there's > no point in > reading two bytes (that's what the 0x02 is in the raw > command). > > Nevertheless, I added it based on this assumption. Could you > give it a > shot? It's in a different branch than last time: > > svn co > > http://svn.savannah.gnu.org/svn/freeipmi/branches/Release-1_4_0_branch/ > freeipmi > cd freeipmi > ./autogen.sh > ./configure > make > ipmi-oem/ipmi-oem supermicro get-power-supply-status2 1 > ipmi-oem/ipmi-oem supermicro get-power-supply-status2 2 > > Al > > > > > > > That said, given their warning of "don't use this", I don't > know what > > good that is. > > > > > > > > > > > > > > > > Thanks, > > > > > > Scott Silverman | IT | Simplex | 312-360-2444 > > 230 S. LaSalle St., Suite 4-100, Chicago, IL 60604 > > > > On Thu, Sep 10, 2015 at 11:51 AM, Albert Chu > <ch...@llnl.gov> wrote: > > On Thu, 2015-09-10 at 09:31 -0500, Scott Silverman > wrote: > > > I had a chance to test pulling the power cable, it > seems > > that what > > > SuperMicro gave me is not useful, as even with the > power > > cable pulled, > > > it still returns "00". I will reach out to them > and see if I > > can get > > > some clarification, but I would suggest not > putting in the > > change as > > > is. > > > > The change is already in there, but we can change it > once we > > have more > > info. > > > > If you do a --debug on the good node vs bad node, > maybe we can > > figure it > > out. Perhaps there are additional bytes returned. > > > > Al > > > > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > Scott Silverman | IT | Simplex | 312-360-2444 > > > 230 S. LaSalle St., Suite 4-100, Chicago, IL 60604 > > > > > > On Wed, Sep 9, 2015 at 4:24 PM, Albert Chu > <ch...@llnl.gov> > > wrote: > > > Cool, it'll be in the next release of > FreeIPMI. > > > > > > Al > > > > > > On Wed, 2015-09-09 at 14:41 -0500, Scott > Silverman > > wrote: > > > > It appears to work, but the 00 is in > fact a "good" > > state. I > > > can't pull > > > > a power cable just now to confirm what a > "bad" > > state is, but > > > I'll let > > > > you know tomorrow. > > > > > > > > > > > > Thanks for such a prompt response, it's > much > > appreciated. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > Scott Silverman | IT | Simplex | > 312-360-2444 > > > > 230 S. LaSalle St., Suite 4-100, > Chicago, IL 60604 > > > > > > > > On Wed, Sep 9, 2015 at 1:25 PM, Albert > Chu > > <ch...@llnl.gov> > > > wrote: > > > > On Wed, 2015-09-09 at 13:16 > -0500, Scott > > Silverman > > > wrote: > > > > > Actually, it seems that 00 is > good in > > this case. I > > > asked > > > > supermicro > > > > > for confirmation on all > possessible > > values but > > > haven't heard > > > > back > > > > > yet. > > > > > > > > Ok, just give it a shot with > what's there. > > If I > > > have to > > > > reverse the > > > > values, that's just a quick > simple change. > > > > > > > > > I will test, probably > tomorrow, and get > > back to > > > you, thanks! > > > > > > > > Great! > > > > > > > > Al > > > > > > > > > > > > > > Scott Silverman | IT | Simplex > | > > 312-360-2444 > > > > > > > > > > 230 S. LaSalle St., Suite > 4-100, > > Chicago, IL 60604 > > > > > > > > > > On Sep 9, 2015 1:12 PM, > "Albert Chu" > > > <ch...@llnl.gov> wrote: > > > > > That's not too far > removed from > > the other > > > > motherboard. From > > > > > ipmi-oem's > > > > > comments: > > > > > > > > > > /* Supermicro OEM > > > > > * From Supermicro > Engineer > > > > > * > > > > > * Request > > > > > * > > > > > * 0x06 - network > function > > > > > * 0x52 - cmd > (master > > read/write) > > > > > * 0x07 - (channel = > 0, bus id > > = 3, bus > > > type = > > > > private) > > > > > * 0x?? - slave > address > > > > > * - 0x70 - ps > 1 > > > > > * - 0x72 - ps > 2 > > > > > * - 0x74 - ps > 3 > > > > > * 0x01 - read count > > > > > * 0x0c - data to > write ... no > > idea why > > > 0x0c > > > > > * > > > > > * Response > > > > > * > > > > > * 0x52 - cmd > > > > > * 0x?? - Completion > Code > > > > > * 0x?? - 0x01 - > good > > > > > * - 0x00 - bad > > > > > */ > > > > > > > > > > I added yours into a > branch of > > FreeIPMI if > > > you could > > > > give it a > > > > > shot. I > > > > > just assumed the good > vs bad > > response was > > > the same. > > > > > > > > > > svn co > > > > > > > > > > > > > > > > http://svn.savannah.gnu.org/svn/freeipmi/branches/supermicroipmioempower > freeipmi > > > > > cd freeipmi > > > > > ./autogen.sh > > > > > ./configure > > > > > make > > > > > ipmi-oem/ipmi-oem > supermicro > > > > get-power-supply-status2 1 > > > > > ipmi-oem/ipmi-oem > supermicro > > > > get-power-supply-status2 2 > > > > > > > > > > As an aside, after I > realized > > that this > > > was going > > > > through the > > > > > master > > > > > read/write and not > some > > arbitrary > > > Supermicro OEM > > > > command, I > > > > > actually can > > > > > add an error message > for the 83h > > error > > > code you saw > > > > before. > > > > > So > > > > > hopefully that's taken > care of > > when you > > > run the > > > > original. I > > > > > get > > > > > > > > > > # ipmi-oem/ipmi-oem > Supermicro > > > > get-power-supply-status 1 > > > > > > > Supermicro:get-power-supply-status failed: > > > NAK on > > > > Write > > > > > > > > > > Al > > > > > > > > > > On Wed, 2015-09-09 at > 12:09 > > -0500, Scott > > > Silverman > > > > wrote: > > > > > > I assume that was > the case. If > > it helps, > > > I have > > > > the > > > > > following from > > > > > > SuperMicro (can only > confirm > > for the > > > listed board, > > > > I don't > > > > > have any > > > > > > other X10 to test > on): > > > > > > > > > > > > > > > > > > For the X10DRU-i+, > please try > > the > > > command below: > > > > > > > > > > > > raw 0x06 0x52 0x07 > 0xb0 0x01 > > 0x0c for > > > power > > > > supply 1 > > > > > > > > > > > > raw 0x06 0x52 0x07 > 0xb2 0x01 > > 0x0c for > > > power > > > > supply 2 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > > > > > > > Scott Silverman | IT > | Simplex > > | > > > 312-360-2444 > > > > > > 230 S. LaSalle St., > Suite > > 4-100, > > > Chicago, IL 60604 > > > > > > > > > > > > On Tue, Sep 8, 2015 > at 12:21 > > PM, Albert > > > Chu > > > > <ch...@llnl.gov> > > > > > wrote: > > > > > > Hi Scott, > > > > > > > > > > > > Thanks for > the report. > > > Unfortunately, > > > > since this is > > > > > a > > > > > > Supermicro > > > > > > specific > error, not > > much we can > > > do except > > > > wait for a > > > > > potential > > > > > > update of > > > > > > information > from > > Supermicro. I > > > can ping > > > > some > > > > > Supermicro folks > > > > > > and see > > > > > > if they can > help. > > > > > > > > > > > > Al > > > > > > > > > > > > On Fri, > 2015-09-04 at > > 11:18 > > > -0500, Scott > > > > Silverman > > > > > wrote: > > > > > > > Running > the ipmi-oem > > > supermicro > > > > > > > > get-(pmbus-)power-supply-status > > > > > > > commands > against > > newer (X10 > > > based) > > > > SuperMicro > > > > > servers > > > > > > results in > the > > > > > > > following > error: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > supermicro:get-pmbus-power-supply-status > > > > failed: > > > > > No error > > > > > > message > > > > > > > found for > command > > 52h, network > > > function > > > > 06h, and > > > > > completion > > > > > > code 83h. > > > > > > > Please > report to > > > > <freeipmi-devel@gnu.org> > > > > > > > > > > > > > > > > > > > > > As > requested, I'm > > reporting. > > > > > > > > > > > > > > > > > > > > > I've > attached debug > > output for > > > the > > > > regular and the > > > > > pmbus > > > > > > version. Let > > > > > > > me know if > there's > > anything I > > > can do to > > > > help > > > > > further. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > > > > > > > > > > Scott > Silverman | IT > > | Simplex > > > | > > > > 312-360-2444 > > > > > > > 230 S. > LaSalle St., > > Suite > > > 4-100, > > > > Chicago, IL 60604 > > > > > > > > > > > > > > > > > > > > > DISCLAIMER: NOTICE > > REGARDING > > > PRIVACY AND > > > > > CONFIDENTIALITY > > > > > > > > > > > > > > The > information > > contained in > > > and/or > > > > accompanying > > > > > this > > > > > > > communication is > > > > > > > intended > only for > > use by the > > > > addressee(s) named > > > > > herein and > > > > > > may contain > > > > > > > legally > privileged > > and/or > > > confidential > > > > > information. If you > > > > > > are not the > > > > > > > intended > recipient > > of this > > > e-mail, you > > > > are hereby > > > > > notified > > > > > > that any > > > > > > > > dissemination, > > distribution or > > > copying > > > > of this > > > > > information, > > > > > > and any > > > > > > > > attachments thereto, > > is > > > strictly > > > > prohibited. If > > > > > you have > > > > > > received > this > > > > > > > e-mail in > error, > > please > > > immediately > > > > notify the > > > > > sender and > > > > > > permanently > > > > > > > delete the > original > > and any > > > copy of any > > > > e-mail and > > > > > any > > > > > > printout > > > > > > > thereof. > Electronic > > > transmissions cannot > > > > be > > > > > guaranteed to be > > > > > > secure or > > > > > > > > error-free. The > > sender > > > therefore does > > > > not accept > > > > > liability > > > > > > for any > > > > > > > errors or > omissions > > in the > > > contents of > > > > this > > > > > message which > > > > > > arise as a > > > > > > > result of > e-mail > > transmission. > > > Simplex > > > > Trading, > > > > > LLC and its > > > > > > affiliates > > > > > > > reserves > the right > > to > > > intercept, > > > > monitor, and > > > > > retain > > > > > > electronic > > > > > > > > communications to > > and from its > > > system as > > > > permitted > > > > > by law. > > > > > > Simplex > > > > > > > Trading, > LLC is a > > registered > > > Broker > > > > Dealer with > > > > > CBOE and a > > > > > > Member of > > > > > > > SIPC. > > > > > > > > > > > > > _______________________________________________ > > > > > > > > Freeipmi-devel > > mailing list > > > > > > > > > Freeipmi-devel@gnu.org > > > > > > > > > > > > > > > > > > > > > > https://lists.gnu.org/mailman/listinfo/freeipmi-devel > > > > > > -- > > > > > > Albert Chu > > > > > > > ch...@llnl.gov > > > > > > Computer > Scientist > > > > > > High > Performance > > Systems > > > Division > > > > > > Lawrence > Livermore > > National > > > Laboratory > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > DISCLAIMER: NOTICE > REGARDING > > PRIVACY AND > > > > CONFIDENTIALITY > > > > > > > > > > > > The information > contained in > > and/or > > > accompanying > > > > this > > > > > communication is > > > > > > intended only for > use by the > > > addressee(s) named > > > > herein and > > > > > may contain > > > > > > legally privileged > and/or > > confidential > > > > information. If you > > > > > are not the > > > > > > intended recipient > of this > > e-mail, you > > > are hereby > > > > notified > > > > > that any > > > > > > dissemination, > distribution or > > copying > > > of this > > > > information, > > > > > and any > > > > > > attachments thereto, > is > > strictly > > > prohibited. If > > > > you have > > > > > received this > > > > > > e-mail in error, > please > > immediately > > > notify the > > > > sender and > > > > > permanently > > > > > > delete the original > and any > > copy of any > > > e-mail and > > > > any > > > > > printout > > > > > > thereof. Electronic > > transmissions cannot > > > be > > > > guaranteed to be > > > > > secure or > > > > > > error-free. The > sender > > therefore does > > > not accept > > > > liability > > > > > for any > > > > > > errors or omissions > in the > > contents of > > > this > > > > message which > > > > > arise as a > > > > > > result of e-mail > transmission. > > Simplex > > > Trading, > > > > LLC and its > > > > > affiliates > > > > > > reserves the right > to > > intercept, > > > monitor, and > > > > retain > > > > > electronic > > > > > > communications to > and from its > > system as > > > permitted > > > > by law. > > > > > Simplex > > > > > > Trading, LLC is a > registered > > Broker > > > Dealer with > > > > CBOE and a > > > > > Member of > > > > > > SIPC. > > > > > -- > > > > > Albert Chu > > > > > ch...@llnl.gov > > > > > Computer Scientist > > > > > High Performance > Systems > > Division > > > > > Lawrence Livermore > National > > Laboratory > > > > > > > > > > > > > > > > > > > > DISCLAIMER: NOTICE REGARDING > PRIVACY AND > > > CONFIDENTIALITY > > > > > > > > > > The information contained in > and/or > > accompanying > > > this > > > > communication is > > > > > intended only for use by the > > addressee(s) named > > > herein and > > > > may contain > > > > > legally privileged and/or > confidential > > > information. If you > > > > are not the > > > > > intended recipient of this > e-mail, you > > are hereby > > > notified > > > > that any > > > > > dissemination, distribution or > copying > > of this > > > information, > > > > and any > > > > > attachments thereto, is > strictly > > prohibited. If > > > you have > > > > received this > > > > > e-mail in error, please > immediately > > notify the > > > sender and > > > > permanently > > > > > delete the original and any > copy of any > > e-mail and > > > any > > > > printout > > > > > thereof. Electronic > transmissions cannot > > be > > > guaranteed to be > > > > secure or > > > > > error-free. The sender > therefore does > > not accept > > > liability > > > > for any > > > > > errors or omissions in the > contents of > > this > > > message which > > > > arise as a > > > > > result of e-mail transmission. > Simplex > > Trading, > > > LLC and its > > > > affiliates > > > > > reserves the right to > intercept, > > monitor, and > > > retain > > > > electronic > > > > > communications to and from its > system as > > permitted > > > by law. > > > > Simplex > > > > > Trading, LLC is a registered > Broker > > Dealer with > > > CBOE and a > > > > Member of > > > > > SIPC. > > > > -- > > > > Albert Chu > > > > ch...@llnl.gov > > > > Computer Scientist > > > > High Performance Systems > Division > > > > Lawrence Livermore National > Laboratory > > > > > > > > > > > > > > > > > > > > > > > > > > > > DISCLAIMER: NOTICE REGARDING PRIVACY AND > > CONFIDENTIALITY > > > > > > > > The information contained in and/or > accompanying > > this > > > communication is > > > > intended only for use by the > addressee(s) named > > herein and > > > may contain > > > > legally privileged and/or confidential > > information. If you > > > are not the > > > > intended recipient of this e-mail, you > are hereby > > notified > > > that any > > > > dissemination, distribution or copying > of this > > information, > > > and any > > > > attachments thereto, is strictly > prohibited. If > > you have > > > received this > > > > e-mail in error, please immediately > notify the > > sender and > > > permanently > > > > delete the original and any copy of any > e-mail and > > any > > > printout > > > > thereof. Electronic transmissions cannot > be > > guaranteed to be > > > secure or > > > > error-free. The sender therefore does > not accept > > liability > > > for any > > > > errors or omissions in the contents of > this > > message which > > > arise as a > > > > result of e-mail transmission. Simplex > Trading, > > LLC and its > > > affiliates > > > > reserves the right to intercept, > monitor, and > > retain > > > electronic > > > > communications to and from its system as > permitted > > by law. > > > Simplex > > > > Trading, LLC is a registered Broker > Dealer with > > CBOE and a > > > Member of > > > > SIPC. > > > -- > > > Albert Chu > > > ch...@llnl.gov > > > Computer Scientist > > > High Performance Systems Division > > > Lawrence Livermore National Laboratory > > > > > > > > > > > > > > > > > > > > > DISCLAIMER: NOTICE REGARDING PRIVACY AND > CONFIDENTIALITY > > > > > > The information contained in and/or accompanying > this > > communication is > > > intended only for use by the addressee(s) named > herein and > > may contain > > > legally privileged and/or confidential > information. If you > > are not the > > > intended recipient of this e-mail, you are hereby > notified > > that any > > > dissemination, distribution or copying of this > information, > > and any > > > attachments thereto, is strictly prohibited. If > you have > > received this > > > e-mail in error, please immediately notify the > sender and > > permanently > > > delete the original and any copy of any e-mail and > any > > printout > > > thereof. Electronic transmissions cannot be > guaranteed to be > > secure or > > > error-free. The sender therefore does not accept > liability > > for any > > > errors or omissions in the contents of this > message which > > arise as a > > > result of e-mail transmission. Simplex Trading, > LLC and its > > affiliates > > > reserves the right to intercept, monitor, and > retain > > electronic > > > communications to and from its system as permitted > by law. > > Simplex > > > Trading, LLC is a registered Broker Dealer with > CBOE and a > > Member of > > > SIPC. > > -- > > Albert Chu > > ch...@llnl.gov > > Computer Scientist > > High Performance Systems Division > > Lawrence Livermore National Laboratory > > > > > > > > > > > > > > DISCLAIMER: NOTICE REGARDING PRIVACY AND CONFIDENTIALITY > > > > The information contained in and/or accompanying this > communication is > > intended only for use by the addressee(s) named herein and > may contain > > legally privileged and/or confidential information. If you > are not the > > intended recipient of this e-mail, you are hereby notified > that any > > dissemination, distribution or copying of this information, > and any > > attachments thereto, is strictly prohibited. If you have > received this > > e-mail in error, please immediately notify the sender and > permanently > > delete the original and any copy of any e-mail and any > printout > > thereof. Electronic transmissions cannot be guaranteed to be > secure or > > error-free. The sender therefore does not accept liability > for any > > errors or omissions in the contents of this message which > arise as a > > result of e-mail transmission. Simplex Trading, LLC and its > affiliates > > reserves the right to intercept, monitor, and retain > electronic > > communications to and from its system as permitted by law. > Simplex > > Trading, LLC is a registered Broker Dealer with CBOE and a > Member of > > SIPC. > -- > Albert Chu > ch...@llnl.gov > Computer Scientist > High Performance Systems Division > Lawrence Livermore National Laboratory > > > > > > > DISCLAIMER: NOTICE REGARDING PRIVACY AND CONFIDENTIALITY > > The information contained in and/or accompanying this communication is > intended only for use by the addressee(s) named herein and may contain > legally privileged and/or confidential information. If you are not the > intended recipient of this e-mail, you are hereby notified that any > dissemination, distribution or copying of this information, and any > attachments thereto, is strictly prohibited. If you have received this > e-mail in error, please immediately notify the sender and permanently > delete the original and any copy of any e-mail and any printout > thereof. Electronic transmissions cannot be guaranteed to be secure or > error-free. The sender therefore does not accept liability for any > errors or omissions in the contents of this message which arise as a > result of e-mail transmission. Simplex Trading, LLC and its affiliates > reserves the right to intercept, monitor, and retain electronic > communications to and from its system as permitted by law. Simplex > Trading, LLC is a registered Broker Dealer with CBOE and a Member of > SIPC. -- Albert Chu ch...@llnl.gov Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory _______________________________________________ Freeipmi-devel mailing list Freeipmi-devel@gnu.org https://lists.gnu.org/mailman/listinfo/freeipmi-devel
