Quite so. SuperMicro is slow to give firmware fixes, but having the latest available firmware helps.
On Thu, Aug 27, 2020 at 2:08 PM Al Chu <ch...@llnl.gov> wrote: > On Thu, 2020-08-27 at 14:04 -0400, Andrew Orme wrote: > > Indeed. Seems to run fine on our other systems running the same exact > > hardware. Agreed that it is specific to Supermicro and is perhaps a > > manufacturing issue somewhere. > > You may want to double check the firmware version, that's sometimes an > issue. > > Al > > > On Wed, Aug 26, 2020 at 1:07 PM Al Chu <ch...@llnl.gov> wrote: > > > Hi Andrew, > > > > > > Thanks for the report. Since this is a OEM specific command, there > > > is > > > a good chance this just isn't supported on your motherboard. There > > > is > > > no way to know what Supermicro may have meant with the 0x83 error > > > code. > > > > > > Al > > > > > > On Thu, 2020-08-20 at 18:28 -0400, Andrew Orme wrote: > > > > admin@server:~# ipmi-oem --debug Supermicro get-power-supply- > > > status 1 > > > > ===================================================== > > > > Master Write Read Request > > > > ===================================================== > > > > KCS Header: > > > > ------------ > > > > [ 0h] = lun[ 2b] > > > > [ 6h] = net_fn[ 6b] > > > > IPMI Command Data: > > > > ------------------ > > > > [ 52h] = cmd[ 8b] > > > > [ BYTE ARRAY ... ] = raw_data[ 4B] > > > > [ 07h 70h 01h 0Ch ] > > > > ===================================================== > > > > Master Write Read Response > > > > ===================================================== > > > > KCS Header: > > > > ------------ > > > > [ 0h] = lun[ 2b] > > > > [ 7h] = net_fn[ 6b] > > > > IPMI Command Data: > > > > ------------------ > > > > [ 52h] = cmd[ 8b] > > > > [ BYTE ARRAY ... ] = raw_data[ 1B] > > > > [ 83h ] > > > > Supermicro:get-power-supply-status failed: No error message found > > > for > > > > command 52h, network function 06h, and completion code 83h. > > > Please > > > > report to <freeipmi-devel@gnu.org> > > > > > > > > admin@server:~# dmidecode -t 39 | grep 'Name' > > > > Name: To Be Filled By O.E.M. > > > > Name: To Be Filled By O.E.M. > > > > > > > > admin@server:~# dmidecode -t 39 > > > > # dmidecode 2.12 > > > > SMBIOS 2.8 present. > > > > > > > > Handle 0x0018, DMI type 39, 22 bytes > > > > System Power Supply > > > > Power Unit Group: 1 > > > > Location: PSU1 > > > > Name: To Be Filled By O.E.M. > > > > Manufacturer: To Be Filled By O.E.M. > > > > Serial Number: To Be Filled By O.E.M. > > > > Asset Tag: To Be Filled By O.E.M. > > > > Model Part Number: To Be Filled By O.E.M. > > > > Revision: To Be Filled By O.E.M. > > > > Max Power Capacity: Unknown > > > > Status: Not Present > > > > Type: Switching > > > > Input Voltage Range Switching: Auto-switch > > > > Plugged: Yes > > > > Hot Replaceable: No > > > > > > > > Handle 0x0019, DMI type 39, 22 bytes > > > > System Power Supply > > > > Power Unit Group: 2 > > > > Location: PSU2 > > > > Name: To Be Filled By O.E.M. > > > > Manufacturer: To Be Filled By O.E.M. > > > > Serial Number: To Be Filled By O.E.M. > > > > Asset Tag: To Be Filled By O.E.M. > > > > Model Part Number: To Be Filled By O.E.M. > > > > Revision: To Be Filled By O.E.M. > > > > Max Power Capacity: Unknown > > > > Status: Not Present > > > > Type: Switching > > > > Input Voltage Range Switching: Auto-switch > > > > Plugged: Yes > > > > Hot Replaceable: No > > > > > >
