BIOS versions are up to date. Referring to the BMC firmware? On Thu, Aug 27, 2020 at 4:00 PM Andy Cress <andycr...@gmail.com> wrote:
> Quite so. SuperMicro is slow to give firmware fixes, but having the > latest available firmware helps. > > On Thu, Aug 27, 2020 at 2:08 PM Al Chu <ch...@llnl.gov> wrote: > >> On Thu, 2020-08-27 at 14:04 -0400, Andrew Orme wrote: >> >> >> > Indeed. Seems to run fine on our other systems running the same exact >> >> >> > hardware. Agreed that it is specific to Supermicro and is perhaps a >> >> >> > manufacturing issue somewhere. >> >> >> >> >> >> You may want to double check the firmware version, that's sometimes an >> >> >> issue. >> >> >> >> >> >> Al >> >> >> >> >> >> > On Wed, Aug 26, 2020 at 1:07 PM Al Chu <ch...@llnl.gov> wrote: >> >> >> > > Hi Andrew, >> >> >> > > >> >> >> > > Thanks for the report. Since this is a OEM specific command, there >> >> >> > > is >> >> >> > > a good chance this just isn't supported on your motherboard. There >> >> >> > > is >> >> >> > > no way to know what Supermicro may have meant with the 0x83 error >> >> >> > > code. >> >> >> > > >> >> >> > > Al >> >> >> > > >> >> >> > > On Thu, 2020-08-20 at 18:28 -0400, Andrew Orme wrote: >> >> >> > > > admin@server:~# ipmi-oem --debug Supermicro get-power-supply- >> >> >> > > status 1 >> >> >> > > > ===================================================== >> >> >> > > > Master Write Read Request >> >> >> > > > ===================================================== >> >> >> > > > KCS Header: >> >> >> > > > ------------ >> >> >> > > > [ 0h] = lun[ 2b] >> >> >> > > > [ 6h] = net_fn[ 6b] >> >> >> > > > IPMI Command Data: >> >> >> > > > ------------------ >> >> >> > > > [ 52h] = cmd[ 8b] >> >> >> > > > [ BYTE ARRAY ... ] = raw_data[ 4B] >> >> >> > > > [ 07h 70h 01h 0Ch ] >> >> >> > > > ===================================================== >> >> >> > > > Master Write Read Response >> >> >> > > > ===================================================== >> >> >> > > > KCS Header: >> >> >> > > > ------------ >> >> >> > > > [ 0h] = lun[ 2b] >> >> >> > > > [ 7h] = net_fn[ 6b] >> >> >> > > > IPMI Command Data: >> >> >> > > > ------------------ >> >> >> > > > [ 52h] = cmd[ 8b] >> >> >> > > > [ BYTE ARRAY ... ] = raw_data[ 1B] >> >> >> > > > [ 83h ] >> >> >> > > > Supermicro:get-power-supply-status failed: No error message found >> >> >> > > for >> >> >> > > > command 52h, network function 06h, and completion code 83h. >> >> >> > > Please >> >> >> > > > report to <freeipmi-devel@gnu.org> >> >> >> > > > >> >> >> > > > admin@server:~# dmidecode -t 39 | grep 'Name' >> >> >> > > > Name: To Be Filled By O.E.M. >> >> >> > > > Name: To Be Filled By O.E.M. >> >> >> > > > >> >> >> > > > admin@server:~# dmidecode -t 39 >> >> >> > > > # dmidecode 2.12 >> >> >> > > > SMBIOS 2.8 present. >> >> >> > > > >> >> >> > > > Handle 0x0018, DMI type 39, 22 bytes >> >> >> > > > System Power Supply >> >> >> > > > Power Unit Group: 1 >> >> >> > > > Location: PSU1 >> >> >> > > > Name: To Be Filled By O.E.M. >> >> >> > > > Manufacturer: To Be Filled By O.E.M. >> >> >> > > > Serial Number: To Be Filled By O.E.M. >> >> >> > > > Asset Tag: To Be Filled By O.E.M. >> >> >> > > > Model Part Number: To Be Filled By O.E.M. >> >> >> > > > Revision: To Be Filled By O.E.M. >> >> >> > > > Max Power Capacity: Unknown >> >> >> > > > Status: Not Present >> >> >> > > > Type: Switching >> >> >> > > > Input Voltage Range Switching: Auto-switch >> >> >> > > > Plugged: Yes >> >> >> > > > Hot Replaceable: No >> >> >> > > > >> >> >> > > > Handle 0x0019, DMI type 39, 22 bytes >> >> >> > > > System Power Supply >> >> >> > > > Power Unit Group: 2 >> >> >> > > > Location: PSU2 >> >> >> > > > Name: To Be Filled By O.E.M. >> >> >> > > > Manufacturer: To Be Filled By O.E.M. >> >> >> > > > Serial Number: To Be Filled By O.E.M. >> >> >> > > > Asset Tag: To Be Filled By O.E.M. >> >> >> > > > Model Part Number: To Be Filled By O.E.M. >> >> >> > > > Revision: To Be Filled By O.E.M. >> >> >> > > > Max Power Capacity: Unknown >> >> >> > > > Status: Not Present >> >> >> > > > Type: Switching >> >> >> > > > Input Voltage Range Switching: Auto-switch >> >> >> > > > Plugged: Yes >> >> >> > > > Hot Replaceable: No >> >> >> > > >> >> >> >> >> >> >> >> >> > >
