A bunch of x9dr7 and sc-826TQ works only for FRU addresses.
Does
ipmi-oem supermicro get-power-supply-status 1|2|3
work for the older ones?
Al
On 9/4/23 21:46, Андрей Грехов wrote:
Hi.
Понедельник, 4 сентября 2023, 22:27 +07:00 от "Al Chu" <ch...@llnl.gov>:
Hi,
I believe this is already implemented via
ipmi-oem supermicro get-pmbus-power-supply-status 1|2|3
If you can confirm, I can document that it works on X9DRD too.
I confirm.
But it depends more on the type of case.
Works for me on cs-825TQ.
Which are connected by i1c connector "power 5 pin" and protocol PMBus
(or old FRU)
This should work from X8 to X11 "power 5 pin".
I have X7DBE-X, but it works very unstable.
A bunch of x9dr7 and sc-826TQ works only for FRU addresses.
ipmitool -H $host -U $user -P $pass raw 0x06 0x52 0x05 0x$address 0x01 0x$d3
$address = 70|72|74
PWS-720-R
$d3 :
0xA Temp, C
0xB Fan1, RPM=$izm*114,5
0xС Fan2, RPM *114,5
----------
There is no desire to add support for reading modern power supplies over the
PMBus (rev 1.0,1.1,1.2) ?
Al
On 9/4/23 05:23, Андрей Грехов wrote:
This working X9drd. PMBus rev.1.1-1.4
ipmitool -H $host -U $user -P $pass raw 0x06 0x52 0x07 0x78 0x01 0x88
InputVoltage
0x78 first PowerSupply
0x7a second PowerSupply
raw 0x06 0x52 0x07 0x78 0x01 0x90 Fan1
raw 0x06 0x52 0x07 0x78 0x01 0x91 Fan2
The's my old articl.
Андрей Грехов
--
Al Chu
Livermore Computing
Lawrence Livermore National Laboratory
Андрей Грехов
--
Al Chu
Livermore Computing
Lawrence Livermore National Laboratory
