Hi,
I am trying to setup a 3com wireless access point to authenticate to a
freeradius server. I have installed and configured the freeradius server as
well as the access point but when I try to authenticate I get the following
error:
rad_recv: Access-Request packet from host 64.214.69.235:4859, id=183,
length=69
Sending duplicate authentication reply to client 64.214.69.235:4859 - ID:
183
Sending Access-Reject of id 183 to 64.214.69.235
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 28 ID 183 with timestamp 3c8f9220
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 64.214.69.235:4859, id=183,
length=69
EAP-Message = "\002\004\000\n\001happy"
Message-Authenticator = 0x8963e751410fdebe8c00bb9310325f6f
NAS-IP-Address = 192.168.100.170
User-Name = "happy"
Framed-MTU = 1400
modcall: entering group authorize
modcall[authorize]: module "preprocess" returns ok
modcall[authorize]: module "suffix" returns ok
users: Matched happy at 73
modcall[authorize]: module "files" returns ok
modcall: group authorize returns ok
rad_check_password: Found Auth-Type Local
auth: type Local
auth: No Password or CHAP-Password attribute in the request
auth: Failed to validate the user.
Sending Access-Reject of id 183 to 64.214.69.235:4859
Finished request 30
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
The part that I cannot figure is the phantom password. I am not sure if the
3com client software is sending the password or the /etc/raddb/users file is
not setup correct. If anyone has had experience with 3com products in the
past any help would be greatly appreciated.
Eric
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
