At 03:19 PM 9/20/2002 -0400, Brandon Lehmann wrote: >Chris, > > This is the result from my debug (radiusd -x -x) > >rad_recv: Accounting-Request packet from host 209.211.205.27:46810, id=250, >length=445 >Thread 2 assigned request 6 >--- Walking the entire request list --- >Threads: total/active/spare threads = 5/1/4 >Waking up in 5 seconds... >Thread 2 handling request 6, (2 handled so far) > User-Name = "[EMAIL PROTECTED]" > NAS-IP-Address = 63.152.3.66 > NAS-Port = 7190 > Service-Type = Framed-User > Cisco-AVPair = "disc-cause-ext=1043" > Cisco-AVPair = "pre-bytes-in=250" > Cisco-AVPair = "pre-bytes-out=216" > Cisco-AVPair = "pre-paks-in=8" > Cisco-AVPair = "pre-paks-out=6" > Cisco-AVPair = "pre-session-time=27" > Cisco-AVPair = "connect-progress=101" > Cisco-AVPair = "nas-rx-speed=26400" > Cisco-AVPair = "nas-tx-speed=38000" > Cisco-NAS-Port = "Async3/07*Serial7/0:1:22" > Calling-Station-Id = "4193321376" > Acct-Status-Type = Stop > Acct-Delay-Time = 0 > Acct-Input-Octets = 0 > Acct-Output-Octets = 8 > Acct-Session-Id = "02000C91" > Acct-Authentic = RADIUS > Acct-Session-Time = 0 > Acct-Input-Packets = 0 > Acct-Output-Packets = 1 > NAS-Port-Type = Async > X-Ascend-Pre-Input-Octets = 250 > X-Ascend-Pre-Output-Octets = 216 > X-Ascend-Pre-Input-Packets = 8 > X-Ascend-Pre-Output-Packets = 6 > X-Ascend-Disconnect-Cause = 43 > X-Ascend-Connect-Progress = 101 > X-Ascend-Data-Rate = 26400 > X-Ascend-PreSession-Time = 27 > X-Ascend-Xmit-Rate = 38000
Qwest isn't sending you a Proxy-State attribute. Kindly ask them how you are supposed to return one if they aren't sending one? http://www.freeradius.org/rfc/rfc2865.html#Proxy-State -Chris -- \\\|||/// \ StarNet Inc. \ Chris Parker \ ~ ~ / \ WX *is* Wireless! \ Director, Engineering | @ @ | \ http://www.starnetwx.net \ (847) 963-0116 oOo---(_)---oOo--\------------------------------------------------------ \ Wholesale Internet Services - http://www.megapop.net - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
