I think you can get it from HOWTO! http://www.missl.cs.umd.edu/wireless/eaptls/
¦b ¶g¤, 2002-11-15 09:10, Ynjiun P. Wang ¼g¹D¡G > >it's not what i wanted actually... you should take a look at the > >messages and decide if the ACK IS valid or where it becomes invalid and > >perhaps why... it's probably invalid at the server-side, otherwise the > >server wouldn't say it. but why? and where has it been changed? is it > >wrong when coming from the supplicant? ... > > Sorry, I am learning... Could you give me one message sample with ACK is valid? then >I could dig it out what's > happening. If you could, please ssage". Thanks. > > >try ethereal... or before: are you using a cisco 350/340? do you have > >the newest firmware? try to update it. you should have anything newer > >than 11.21 should be just fine. try using those :eap_diag1_on, > >:eap_diag2_on flags > > my ethereal version is: 0.9.3. Do I need later version? > > Yes, I am using cisco 350 with latest firmware 12.00T > Could you tell me where to set :eap_diag1_on and eap_diag2_on flags > > Thanks a lot. > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html -- Regard, Jeffery Huang iMining Technology Inc., 8F-4, No.432, Sec.1 Keelung Rd., Taipei,Taiwan Tel:886-2-27235122 ext 20 Fax:886-2-27232287 http://www.imining.com.tw email:[EMAIL PROTECTED] w - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
