On Mon, Mar 10, 2003 at 02:19:48PM +0200, Kostas Kalevras wrote: > On Sun, 9 Mar 2003, Edwin Groothuis wrote: > > > Greetings, > > > > In the past three months or so since we've used FreeRadius we found > > out that our IP-Pool is running out of free addresses. Most likely > > because of the way we get packets in combination with the way our > > dialin-service is handled. > > There was a problem in versions older than 1.12 (cvs revision) of the ippool > module. > The module will free an ip address when it receives an accounting-stop > for an active nas/port combination or an access-request for the same > combination. So normally it should not run out of ip addresses.
I'm running 0.8.1, but it's still in there. Maybe it's semothing weird with our setup, we get all accounting packets double: one from the NAS, one from the Accounting server and the stop-packets don't have the right NAS-IPaddress in the packet. What a mess.... Anyway, I'm using the ippooltool to keep us up and running :-) Edwin -- Edwin Groothuis | Personal website: http://www.mavetju.org [EMAIL PROTECTED] | Weblog: http://www.mavetju.org/weblog/weblog.php - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html