I have already added the files module in the authorize section and I see the same 
logs...it doesn't work either.

In the autheticate section I have only eap enabled. the rest of Auth-Types are 
commented(PAP, MS-CHAP, CHAP...) could it have anything to do with my problem?

Blanca

----- Mensaje original -----
De: Kostas Kalevras <[EMAIL PROTECTED]>
Fecha: Lunes, Febrero 23, 2004 11:16 am
Asunto: Re: problem with LEAP

> On Mon, 23 Feb 2004, BLANCA FERRERO RODRIGUEZ wrote:
> 
> > I'm trying to run RADIUS with leap. I've written to the list 
> before but I haven't solved the problem yet, so I send teh logs I 
> see on the screen because I don't understand the problem.
> > First, I apologise because the logs are a bit long but I don't 
> distinguish between the important and the non-important ones.
> >
> > My user is configured like this:
> > prueba Auth-Type := eap,  User-Password == "12345678"
> >        Service-Type = Login-User
> >
> >
> >         NAS-IP-Address = 172.26.0.3
> >         NAS-Identifier = "ap_cisco               "
> > modcall: entering group authorize for request 1
> >   rlm_eap: EAP packet type notification id 3 length 38
> >   rlm_eap: EAP Start not found
> >   modcall[authorize]: module "eap" returns updated for request 1
> > modcall: group authorize returns updated for request 1
> 
> 
> You only have the eap module in the authorize section. You should 
> also add the
> files module so that the user password can be set
> 
> 
> >   rad_check_password:  Found Auth-Type EAP
> > auth: type "EAP"
> > modcall: entering group authenticate for request 1
> >   rlm_eap: EAP packet type notification id 3 length 38
> >   rlm_eap: EAP Start not found
> >   rlm_eap: Request found, released from the list
> >   rlm_eap: EAP_TYPE - leap
> >   rlm_eap: processing type leap
> > rlm_eap_leap: No User-Password or NT-Password configured for 
> this user
> 
> 
> That's the important message. Try adding the files module in the 
> authorizesection and it should work ok.
> 
> 
> >   modcall[authenticate]: module "eap" returns invalid for 
> request 1
> > modcall: group authenticate returns invalid for request 1
> > auth: Failed to validate the user.
> > Delaying request 1 for 1 seconds
> > Finished request 1
> 
> --
> Kostas Kalevras               Network Operations Center
> [EMAIL PROTECTED]     National Technical University of Athens, Greece
> Work Phone:           +30 210 7721861
> 'Go back to the shadow'       Gandalf
> 
> - 
> List info/subscribe/unsubscribe? See 
> http://www.freeradius.org/list/users.html


- 
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Reply via email to