>> >>>>> [EMAIL PROTECTED] 4/9/2004 6:48:41 AM >>> >> >>> I use 802.1x/EAP_MD5 with user as xsupplicant, switch cisco 3550, >>> freeradius server. It works very well, but now I need to assign >> dynamic >>> vlan to authenticated user. >>> I 've update my Freeradius "users" file with this parameters asked >> by >>> switch Cisco : >>> Tunnel-Type = VLAN >>> Tunnel-Medium-Type = 802 >>> Tunnel-Private6group-ID = VLAN NAME >> >> You need to specify :1 after the attribute names. That one hung me up >> for a while, and I believe I found the solution in the Cisco >> documentation. This works for me: >> >> Tunnel-Type:1 := VLAN, >> Tunnel-Medium-Type:1 := IEEE-802, >> Tunnel-Private-Group-ID:1 := 726 >> >> I also believe you need to use a number for the VLAN (726 is an example >> from my site). >> >> -- David Hart >> > > Hi all, > > Thx David, i've tried your config, but freeradius doesn't accept > "IEEE-802" value attibute for Tunnel-Medium-Type, it needs only "802". And > then I've no error but switchport stay in default VLAN and not in the vlan > configured in freeradius "users" file . > Maybe it's because there is no entry for this attributes in "dictionnary" > or "dictionnary.cisco" files: > Tunnel-Type > Tunnel-Medium-Type > Tunnel-Private-Group-ID . > If someone has an idea ??? > > Fred > Sorry, I've found this attributes, they are define in "dictionnary.tunnel" file. But it ever don't work.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html