Alan, I have compiled the PAM-Radius module 1.3.16 using gcc 3.3.2 on Solaris 8. It seems to have compiled OK, no errors reported. I have copied pam_radius_auth.so to /lib/security. I have setup pam_radius_auth.conf in /etc/raddb/server with my Radius Server address and shared secret. I have configured /etc/pam.conf with the required entries, including the debug option.
When I try a telnet session to the machine I am not seeing any Radius packets going out on the wire. I am using Ethereal to monitor the IP traffic. Nor does the Radius server indictate that it is seeing any packets arrive. I am also not seeing any messages in the /var/adm/messages file either. It appears that the PAM module is not being executed but I don't know what else to look at to verify if it is functioning. The file permissions and ownership for pam_radius_auth.so are the same as the other PAM modules. Do you have any suggestions on the best way to determine if the module is even running? I apppreciate your assistance. Steve VanWambeck - SMTT TDG Platform Development - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html