Hello,
I am working with the Cisco and Freeradius, using only VoIP records.
My question is that the command "aaa update new info" in the Cisco will send me update
of new information about an active session, but when i debug the freeradius, i only
see acct-status-type=Alive
but for Call-Type=Telephony. This is an example:
rad_recv: Accounting-Request packet from host NASIP:1646, id=98, length=454
Acct-Session-Id = "013FB949"
h323-setup-time = "h323-setup-time=.17:43:53.367 est Fri Jun 4 2004"
h323-gw-id = "h323-gw-id=NASID"
h323-conf-id = "h323-conf-id=1B8ABDC9 B5A711D8 899FB3DB 577CC76C"
h323-call-origin = "h323-call-origin=answer"
h323-call-type = "h323-call-type=Telephony"
Cisco-AVPair = "h323-incoming-conf-id=1B8ABDC9 B5A711D8 899FB3DB 577CC76C"
Cisco-AVPair = "subscriber=RegularLine"
Acct-Session-Time = 0
Acct-Status-Type = Alive
NAS-Port-Type = Async
Cisco-NAS-Port = "ISDN 3/0:D:1"
NAS-Port = 0
Cisco-AVPair = "interface=ISDN 3/0:D:1"
Calling-Station-Id = "6164540384"
Called-Station-Id = "58150525556660866"
Service-Type = Login-User
NAS-IP-Address = NASIP
Acct-Delay-Time = 0
Does the alive packets work only with Telephony records?.. o also they could work with
VoIP?
Thanks for any help,
Alex
___________________________________________________
Check-out GO.com
GO get your free GO E-Mail account with expanded storage of 6 MB!
http://mail.go.com
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
