I have two questions: 1. I have recently completed a freeradius install and tested it using NTradping. Everything looks good. My access point is a D-Link DWL-2700AP outdoor access point. It supports (among other things) WPA-RADIUS and 802.1x. The AP is configured to use 802.1x on port 1812 for auth and 1813 for acctg. When I do a test with NTradping I can watch the requests come in. When I try to connect to AP I don't see any auth requests on the server. D-Link says the device is fully radius compliant. In the clients.conf I have the NAS configured as a type other since D-Link isn't in the list with the other vendor's. I would like to know at least where I can get started troubleshooting the issue. Is there a Windows software utility that will let me read the info coming out of the NAS to see what it is sending? If more info is needed let me know so that I can forward it to the list.
2. This is possibly a dumb question. I apologize in advance if it is. We want to control upload and download bandwidth with the radius box. In order to do this does the radius server need to physically be connected between the NAS and internet router? Gene - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
