Hello all
I'm using a LDAP (with {Crypt} password -- as I know it is in binary)
ldapsearch on this field will show password like
userPassword:: e2NyeXB0fSQxJEFqJDY0NE5rVDFXXXXXXXXXXXXjA=
And I've configure Auth_type :EAP
Can someone really show how to configure freeradius to use LDAP with the
crypt password?
Please and Thank You
the error message is as below:
rlm_eap_md5: User-Password is required for EAP-MD5 authentication
rlm_eap: Handler failed in EAP/md5
rlm_eap: Failed in EAP select
These are the log.
Thank You
Chan Min Wai
======================================================================
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.0.18:8021, id=14,
length=222
Framed-MTU = 1466
NAS-IP-Address = 192.168.0.18
NAS-Identifier = "CAN_OECTEST"
User-Name = "satyam"
Service-Type = Framed-User
NAS-Port = 81
NAS-Port-Type = Ethernet
NAS-Port-Id = "ether6_81"
Called-Station-Id = "00-0f-3d-ce-1a-54"
Calling-Station-Id = "00-0d-88-6f-48-24"
Connect-Info = "CONNECT Ethernet 2Mbps Full duplex"
State = 0xb587dbf19b92f081945233fb593914f8
EAP-Message =
0x0202001c0410329795248fa5a101cdb826808fb85fdf73617479616d
Message-Authenticator = 0x200d5ca035b6548a3d6b3e4217900dd8
rad_lowerpair: User-Name now 'satyam'
rad_rmspace_pair: User-Name now 'satyam'
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
modcall[authorize]: module "preprocess" returns ok for request 5
modcall[authorize]: module "chap" returns noop for request 5
modcall[authorize]: module "mschap" returns noop for request 5
rlm_realm: No '@' in User-Name = "satyam", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 5
rlm_eap: EAP packet type response id 2 length 28
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 5
users: Matched DEFAULT at 152
users: Matched DEFAULT at 171
modcall[authorize]: module "files" returns ok for request 5
modcall: group authorize returns updated for request 5
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
rlm_eap: Request found, released from the list
rlm_eap: EAP/md5
rlm_eap: processing type md5
rlm_eap_md5: User-Password is required for EAP-MD5 authentication
rlm_eap: Handler failed in EAP/md5
rlm_eap: Failed in EAP select
modcall[authenticate]: module "eap" returns invalid for request 5
modcall: group authenticate returns invalid for request 5
auth: Failed to validate the user.
Delaying request 5 for 1 seconds
Finished request 5
Going to the next request
--
This message has been scanned for viruses and dangerous content by
OCE Sdn Bhd (http://www.ocesb.com.my) MailScanner, and is believed to be clean.
signature.asc
Description: OpenPGP digital signature
