On Fri, 2005-14-01 at 10:41 -0600, Brad Fisher wrote: > Michael A Cooper wrote: > > > I use the pmvision for my Portmaster Admin stuff, It's a really nice > > program I can get right into over the net config it reboot it pretty > > much what-ever needs to be done. Okay I'll Stop rambling this is off > > topic Sorry Guys > > > > Kerry Penland wrote: > > > >> I also have a PM3 functioning with Freeradius, working well for over > >> a year. I am using ports 1812 and 1813 however. I use dialupadmin to > >> perform most of the day to day customer stuff. If you reboot the pm3 > >> while clients are online, you will get no accounting stop packets and > >> thus you'll be left with some open sessions to clean up. > > > If you disconnect the T1(s) from the back of the PM3 for a few seconds > before rebooting, it will send the stop packets. Of course, you can't > do that remotely :) > > -Brad IIRC portmasters do send accounting off packets when you run reboot from the command line.
It would be nice to be able to close all the open calls on a NAS with a single command. I have not been working on dialup_admin for a while and don't know if it is already possible using it. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html