Try to put EAP instead of Local in the users file Jon
On Thu, 20 Jan 2005 [EMAIL PROTECTED] wrote: > Hello all, > > I was trying to get EAP-MD5 authentication working with freeradius. I'm > using radeapclient to send in the request. > > I have a user in my users file as shown below. > > DNIS:123456789 Auth-Type := Local, User-Password == "marty" > Service-Type = Framed-User, > Framed-Protocol = PPP, > Framed-IP-Address = 1.2.3.4, > Framed-IP-Netmask = 255.255.255.0, > Framed-Routing = Broadcast-Listen, > Framed-Filter-Id = "std.ppp", > Framed-MTU = 1500, > Framed-Compression = Van-Jacobsen-TCP-IP > > I'm sending in the request using radeapclient with the details below. > > User-Name = "DNIS:123456789" > EAP-MD5-Password = "marty" > NAS-IP-Address = 10.230.199.211 > EAP-Code = Response > EAP-Id = 210 > EAP-Type-Identity = "DNIS:123456789" > Message-Authenticator = 0x00 > NAS-Port = 0 > > > ./radeapclient -x 10.230.199.211 auth SharedSecret < ~/EAP/req.txt > > It works and I get an Access Accept out with EAP Success. > > However the Access-Challenge that freeradius sends me back contains all > the connection attributes as the output from radeapclient below shows. > > rad_recv: Access-Challenge packet from host 10.230.199.211:1812, id=140, > length=131 > Service-Type = Framed-User > Framed-Protocol = PPP > Framed-IP-Address = 1.2.3.4 > Framed-IP-Netmask = 255.255.255.0 > Framed-Routing = Broadcast-Listen > Filter-Id = "std.ppp" > Framed-MTU = 1500 > Framed-Compression = Van-Jacobson-TCP-IP > EAP-Message = 0x01d300160410c85c14878e1b23ee8b5703ad2d916a25 > Message-Authenticator = 0x39668b64ccf66b262e280f3d5c965e3c > State = 0x28b0e037604ae483026cf00352a72fa4 > > > > I know I have most likely mis-configured something to cause freeradius > to send these connection details out in a Challenge packet when it > should not. > > Does anyone know what I might have wrong in my configuration. > > Also does anyone know why I have to run the radeapclient program from > the freeradius-1.0.1/src/modules/rlm_eap directory where I complied the > code. > > > Thanks for any help, > Martin > > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html