In 1.1.6 you can make several sql.conf modules with different accounting queries. Then sort out which NAS uses which in acct_users file. Read about multiple sql instances :
http://wiki.freeradius.org/Rlm_sql Ivan Kalik Kalik Informatika ISP Dana 26/7/2007, "Nicolas Velazquez" <[EMAIL PROTECTED]> piše: > > >Thank you very much Ivan. >It´s very useful to know that 2.0 could include this features. > >But, also, it's very useful to know if 1.1.6 includes or not any of these. >And this is an important question. >In the past I wasted so much time reading, >searching and testing features that finally were >impossible for a certain version of software ..... > >Another key is the stability. >2.0 is a pre-release and the service must not support outages or bugs. >Of course, we shall update to 2.0 as soon as the >software can be reasonably stable. >But now, the only programmed update in the next future is 1.1.7. > >Thanks again for such useful information > > Nicolas > > > > >Have a look at 2.0. It can do if/than/else in .conf files > >so you should > >be able to define different sql statements for different > >cases. > > > >Ivan Kalik > >Kalik Informatika ISP > > > > > >Dana 26/7/2007, "Nicolas Velazquez" <nicolas.velazquez at > >uam.es> pi�e: > > > >>Hi, > >> > >>We are using freeradius 1.1.6, now, to provide > >>access for our wireless network only. > >>The accounting is very detailed and > >>comprehensive: IP addresses, usernames, packets, roles, > >APs, SSIDs, etc. > >> > >>Now, we are starting to use the same radius to > >>give 802.1x access to our wired network. > >> > >>The key is that the accounting records for a wired switch > >are VERY different. > >>Now, AP and SSID, are nonsense items, for example. > >>But we need another records. > >> > >>Can freeradius use different accounting sql inserts > >depending on NAS? > >> > >>Is there any document showing something like this? > >>I have read many documents but I can not find a clear > >answer. > >> > >>This was the main question. > >> > >>A related tiny question is as follows. > >>The most comfortable configuration will be to use > >>different accounting inserts depending on huntgroups. > >>Then we could select sql inserts for one > >>huntgroup (all our wired NASes) and different sql > >>insert for another huntgroup (all our wireless NASes). > >>The addition, remove or change of the different > >>NASes could be made modifying only the lists contained in > >the huntgroups file. > >>It could be very clean and useful. > >>But, when I read the huntgroups documentation I > >>have the strong suspect I can´t do this. > >> > >>Thank you very much in advance, > >> > >> Nicolas Velazquez > >> > > > > > > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html