Have a look at 2.0. It can do if/than/else in .conf files so you should be able to define different sql statements for different cases.
Ivan Kalik Kalik Informatika ISP Dana 26/7/2007, "Nicolas Velazquez" <[EMAIL PROTECTED]> piše: >Hi, > >We are using freeradius 1.1.6, now, to provide >access for our wireless network only. >The accounting is very detailed and >comprehensive: IP addresses, usernames, packets, roles, APs, SSIDs, etc. > >Now, we are starting to use the same radius to >give 802.1x access to our wired network. > >The key is that the accounting records for a wired switch are VERY different. >Now, AP and SSID, are nonsense items, for example. >But we need another records. > >Can freeradius use different accounting sql inserts depending on NAS? > >Is there any document showing something like this? >I have read many documents but I can not find a clear answer. > >This was the main question. > >A related tiny question is as follows. >The most comfortable configuration will be to use >different accounting inserts depending on huntgroups. >Then we could select sql inserts for one >huntgroup (all our wired NASes) and different sql >insert for another huntgroup (all our wireless NASes). >The addition, remove or change of the different >NASes could be made modifying only the lists contained in the huntgroups file. >It could be very clean and useful. >But, when I read the huntgroups documentation I >have the strong suspect I can´t do this. > >Thank you very much in advance, > > Nicolas Velazquez > > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html