Andreas Kalb (akalb) wrote: > I'm unfortunately still not getting it to work anymore after upgrade to 2.0.3. > > I added the following to sites-available/default at top of document: > > server bb-10k {
I'm not sure why. As the documentation suggests, starting with the default configuration is the best idea. > accounting { > ... > post-auth { And no "authorize" or "authenticate" section. > ippool test_pool { > range-start = 172.16.100.1 Module configurations belong in the "modules" section of radiusd.conf. They do NOT go in a server section. > and then get: > /usr/local/etc/raddb/sites-enabled/default[70]: Failed to find module > "test_pool". > /usr/local/etc/raddb/sites-enabled/default[66]: Errors parsing accounting > section. > > So now I wonder how to specify the ippool section there. You don't. Again, start with the default configuration. Add ONE module: test_pool. Configure it, and get it to assign IP addresses. Then, once that works, configure the ascend filter attributes AFTER the "test_pool" module has been run in the "post-auth" section. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html