On Fri, Sep 26, 2008 at 3:05 PM, David Blackman <[EMAIL PROTECTED]> wrote:
> I have purchased a Linksys SLM248G switch that has 802.1x support. I am > new to radius server and would like to use this switch to authenticate ports > for a lab to a freeradius server. I have installed freeradius 2.1.0 on > freebsd 7.0 system. > > It is the default configuration for FreeRadius 2.1.0 with the following > added to the client.conf. > client 128.227.232.133 { > secret = thisislinksys > shortname = 232.133 > } > The Linksys switch is setup as follows: > IP address: 128.227.220.28 > Priority: 0 > Authenticatio port: 1812 > number of retries: 3 > timeout for reply: 3 > dead time: 0 > key string: thisislinksys > source IP address: 128.227.232.133 > usage type: 802.1x > > The WindowsXP setup: > enable 802.1x auth: checked > EAP type: MD5-challenge > > I do not see any output from the Freeradius server running radiusd -X. > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > >From the FR server, can you ping 128.227.232.133?
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html