All right, Yes, I have tried the rpm and got failed dependencies. Then I tried to install the dependencies and got another failed dependencies. So , I was in a loop, and decided to go with the source.
It looks like it won't be as simple as I thought. rpm -ivh freeradius-2.1.1-2.fc10.x86_64.rpm error: Failed dependencies: libcrypto.so.7()(64bit) is needed by freeradius-2.1.1-2.fc10.x86_64 libssl.so.7()(64bit) is needed by freeradius-2.1.1-2.fc10.x86_64 Thank you for your help. I'll try the rpms again. Duan > -----Original Message----- > From: > [EMAIL PROTECTED] dius.org [mailto:freeradius-users-> [EMAIL PROTECTED] On > Behalf Of John Dennis > Sent: Wednesday, October 08, 2008 10:46 AM > To: FreeRadius users mailing list > Subject: Re: Install error > > > Olavo Dietrich wrote: > > Thanks Nicolas > > > > I have these "fail" alll over the place in my configure. Attached. > > > Do you have these dependencies installed? If not then there > is nothing > wrong other than not preparing your system to perform the build. You > need to go back and install the missing dependencies. > > One advantage of RPM based builds is they declare > dependencies and won't > run until the dependencies are satisfied. Because the > dependencies are > specified at the package level it's easy to know which packages to > install to satisfy the dependencies. > > -- > John Dennis <[EMAIL PROTECTED]> > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html