On 24/03/2010, at 8:21 PM, Fajar A. Nugraha wrote: > On Wed, Mar 24, 2010 at 3:51 PM, Matt Harlum <m...@cactuar.net> wrote: >> Hi, >> >> I'm running Freeradius 2.1.6 on MacOSX 10.5.7 on a Dual-G4 867Mhz PowerMac >> >> Since march last year I've had 2.1.6 installed however it's been switched >> off for the last few months. >> Recently I powered it back on and have run system updates etc and got to the >> point I am now >> >> When I launch FreeRadius it says it is listening on *:1812 for auth however >> my AP is unable to connect, > > "unable to connect" is the result. Many things can cause it, from > incorrent radius IP/secret settings on AP to firewalls blocking > packets.
Checked both which are correct, no firewalls enabled > >> and trying telnet on port 1812 results in "Connection Refused" > > you can't test UDP with telnet. Try the included radtest and radclient > Ahh ok, I'll give those a try >> >> I've tried reverting the configuration to default but it hasn't worked. >> running radiusd -x does not throw any errors > > does it print incoming packets and process it? > does tcpdump (or whatever packet capture tools you have) shows incoming > packets? > It doesn't show anything when connection attempts are made, I'll let you know how I go with netcat and the radtest tools Thanks > -- > Fajar > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
