If u really want 2 knw the issue, undo the changes one by one until it breaks again.
----- Original Message ----- From: freeradius-users-bounces+ggatten=waddell....@lists.freeradius.org <freeradius-users-bounces+ggatten=waddell....@lists.freeradius.org> To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Sent: Wed Mar 24 04:56:19 2010 Subject: Re: Freeradius says it is listening on port 1812, but isn't Hi, I believe the problem is now resolved The only things I changed was that my hosts file was wrong, the IP for the servers FQDN was incorrect but I'm not sure this is what it was I also turned off ip forwarding with sysctl -w net.inet.ip.forwarding=0 Even though natd, and the firewall have been disabled. must be a weird OSX thing Sorry for wasting your time guys and thanks for the help Regards, Matt Harlum On 24/03/2010, at 8:27 PM, Matt Harlum wrote: > On 24/03/2010, at 8:21 PM, Fajar A. Nugraha wrote: > >> On Wed, Mar 24, 2010 at 3:51 PM, Matt Harlum <m...@cactuar.net> wrote: >>> Hi, >>> >>> I'm running Freeradius 2.1.6 on MacOSX 10.5.7 on a Dual-G4 867Mhz PowerMac >>> >>> Since march last year I've had 2.1.6 installed however it's been switched >>> off for the last few months. >>> Recently I powered it back on and have run system updates etc and got to >>> the point I am now >>> >>> When I launch FreeRadius it says it is listening on *:1812 for auth however >>> my AP is unable to connect, >> >> "unable to connect" is the result. Many things can cause it, from >> incorrent radius IP/secret settings on AP to firewalls blocking >> packets. > > Checked both which are correct, no firewalls enabled > >> >>> and trying telnet on port 1812 results in "Connection Refused" >> >> you can't test UDP with telnet. Try the included radtest and radclient >> > > Ahh ok, I'll give those a try > >>> >>> I've tried reverting the configuration to default but it hasn't worked. >>> running radiusd -x does not throw any errors >> >> does it print incoming packets and process it? >> does tcpdump (or whatever packet capture tools you have) shows incoming >> packets? >> > > It doesn't show anything when connection attempts are made, I'll let you know > how I go with netcat and the radtest tools > Thanks > >> -- >> Fajar >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
