On Fri, Aug 6, 2010 at 12:39 AM, Alan DeKok <al...@deployingradius.com>wrote:
> Mike J wrote: > > I've fixed the x86 module (was using a wrong client config file). So I > > have x86 working but don't have the ppc module working. > .. > > Is this likely the cause of my issue? > > Yes. Figure out how to build the MD5 code with the correct endian > definitions. Don't be afraid to hard-code the definition in the source. > > That seemed to work. In case others are interested: in 1.3.17 you have to define "HIGHFIRST" if you are compiling for a big endian arch (ppc in my case). I added "-DHIGHFIRST" to CFLAGS in the makefile, rather than hard-code it in md5.c. Alan, thanks for your help.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
