Thank you - appreciate the response. Have it working now and it ends up being a JunOS code issue - geesh..
Sorry for the noise... Paul -----Original Message----- From: freeradius-users-bounces+paul=paulstewart....@lists.freeradius.org [mailto:freeradius-users-bounces+paul=paulstewart....@lists.freeradius.org] On Behalf Of Alan DeKok Sent: Tuesday, January 24, 2012 1:24 PM To: FreeRadius users mailing list Subject: Re: Juniper MX auth issue Paul Stewart wrote: > The minute we add a static IP address, things go weird with the MX > platform. The user authenticates and obtains the correct IP address > but no traffic will pass. JTAC says this is an attributes related > issue and we are back and forth. RADIUS isn't magic. Take the attributes Juniper needs, and send them in an Access-Accept. If it works, you're OK. If not, ask Juniper what attributes their NAS needs. > I was hoping someone on the list here could correct by users entry > below based on their experiences? Ask Juniper what their product needs. They're really the best source of information about their product. This isn't a FreeRADIUS question, unfortunately. You can clearly edit the config files correctly. So the only question is what kind of attributes are needed by the Juniper box. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html