Hello,
I looked at the log output I see what is wrong but dont understand why.
The user gets rejected because no password was found. It was not found
because the $INCLUDE directive did not include the users.group1 into the
users file.
Alan you said that the include directive is ignored if its not being
seen or the included file is empty.
It's not empty so assuming that the directive is not being seen what
would be reason for that??
Thanks,
Kris
Below is the log file.
rad_recv: Access-Request packet from host xxx.xxx.xxx.xxx port 1645,
id=129, length=153
Debug: Waking up in 0.3 seconds.
Debug: Thread 3 got semaphore
Debug: Thread 3 handling request 7, (2 handled so far)
Framed-Protocol = PPP
User-Name = "0123456...@dsl.test.ie"
CHAP-Password = 0xac52fc9fec42d669c546add53f9e516ffb
Calling-Station-Id = "CWT26 atm 1/1/12/03:8.35#"
Connect-Info = "1000000000"
NAS-Port-Type = ISDN
NAS-Port = 20396
NAS-Port-Id = "Uniq-Sess-ID396"
Service-Type = Framed-User
NAS-IP-Address = xxx.xxx.xxx.xxx
Info: (7) <thread> : # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
Info: (7) <thread> : group authorize {
Info: (7) <thread> : - entering group authorize {...}
Info: (7) [preprocess] = ok
Info: (7) auth_log : expand:
/usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d ->
/usr/local/var/log/radius/radacct/xxx.xxx.xxx.xxx/auth-detail-20120822
Info: (7) auth_log :
/usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands
to /usr/local/var/log/radius/radacct/xxx.xxx.xxx.xxx/auth-detail-20120822
Info: (7) auth_log : expand: %t -> Wed Aug 22 13:53:41 2012
Info: (7) [auth_log] = ok
Info: (7) chap : Setting 'Auth-Type := CHAP'
Info: (7) [chap] = ok
Info: (7) [mschap] = noop
Info: (7) [digest] = noop
Info: (7) suffix : Looking up realm "dsl.test.ie" for User-Name =
"0123456...@dsl.test.ie"
Info: (7) suffix : Found realm "dsl.test.ie"
Info: (7) suffix : Adding Realm = "dsl.test.ie"
Info: (7) suffix : Authentication realm is LOCAL.
Info: (7) [suffix] = ok
Info: (7) eap : No EAP-Message, not doing EAP
Info: (7) [eap] = noop
Info: (7) [files] = noop
Info: (7) sql : expand: %{Stripped-User-Name} ->
Info: (7) sql : ... expanding second conditional
Info: (7) sql : expand: %{User-Name} -> 0123456...@dsl.test.ie
Info: (7) sql : expand: %{%{User-Name}:-DEFAULT} ->
0123456...@dsl.test.ie
Info: (7) sql : expand:
%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} -> 0123456...@dsl.test.ie
Info: (7) sql : sql_set_user escaped user --> '0123456...@dsl.test.ie'
Debug: rlm_sql (sql): Closing idle connection (6)
Debug: No trigger subsection: ignoring trigger modules.sql.close
Debug: rlm_sql (sql): Closing idle connection (5)
Debug: No trigger subsection: ignoring trigger modules.sql.close
Debug: rlm_sql (sql): Opening additional connection (7)
Info: rlm_sql_mysql: Starting connect to MySQL server
Debug: No trigger subsection: ignoring trigger modules.sql.open
Debug: rlm_sql (sql): Reserved connection (7)
Info: (7) sql : expand: SELECT id, username, attribute, value,
op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER
BY id -> SELECT id, username, attribute, value, op FROM
radcheck WHERE username = '0123456...@dsl.test.ie' ORDER BY id
Info: (7) sql : expand: SELECT groupname FROM radusergroup
WHERE username = '%{SQL-User-Name}' ORDER BY priority ->
SELECT groupname FROM radusergroup WHERE username =
'0123456...@dsl.test.ie' ORDER BY priority
Debug: rlm_sql (sql): Released connection (7)
Debug: rlm_sql (sql): Opening additional connection (8)
Info: rlm_sql_mysql: Starting connect to MySQL server
Debug: No trigger subsection: ignoring trigger modules.sql.open
Info: (7) sql : User 0123456...@dsl.test.ie not found
Info: (7) [sql] = notfound
Info: (7) [expiration] = noop
Info: (7) [logintime] = noop
Info: (7) pap : WARNING! No "known good" password found for the user.
Authentication may fail because of this.
Info: (7) [pap] = noop
Info: (7) Found Auth-Type = CHAP
Info: (7) # Executing group from file
/usr/local/etc/raddb/sites-enabled/default
Info: (7) group CHAP {
Info: (7) - entering group CHAP {...}
Info: (7) chap : login attempt by "0123456...@dsl.test.ie" with CHAP
password
Info: (7) chap : Cleartext-Password is required for authentication
Info: (7) [chap] = invalid
Info: (7) Failed to authenticate the user.
Auth: (7) Login incorrect (rlm_chap: Clear text password not available):
[0123456...@dsl.test.ie/<CHAP-Password>] (from client 4050.services.v2.A
port 20396 cli CWT26 atm 1/1/12/03:8.35#)
Info: (7) Using Post-Auth-Type Reject
Info: (7) # Executing group from file
/usr/local/etc/raddb/sites-enabled/default
Info: (7) group REJECT {
Info: (7) - entering group REJECT {...}
Info: (7) attr_filter.access_reject : expand: %{User-Name} ->
0123456...@dsl.test.ie
Info: (7) attr_filter.access_reject : Matched entry DEFAULT at line 11
Info: (7) [attr_filter.access_reject] = updated
Info: (7) eap : Request didn't contain an EAP-Message, not inserting
EAP-Failure
Info: (7) [eap] = noop
Info: (7) policy remove_reply_message_if_eap {
Info: (7) - entering policy remove_reply_message_if_eap {...}
Info: (7) ? if (reply:EAP-Message && reply:Reply-Message)
Info: (7) ? Evaluating (reply:EAP-Message ) -> FALSE
Info: (7) ? Skipping (reply:Reply-Message)
Info: (7) ? if (reply:EAP-Message && reply:Reply-Message) -> FALSE
Info: (7) else else {
Info: (7) - entering else else {...}
Info: (7) [noop] = noop
Info: (7) - else else returns noop
Info: (7) - policy remove_reply_message_if_eap returns noop
Info: (7) Finished request 7.
Debug: Thread 3 waiting to be assigned a request
Debug: Waking up in 0.6 seconds.
Info: (7) Sending delayed reject
Sending Access-Reject of id 129 to xxx.xxx.xxx.xxx port 1645
Debug: Waking up in 4.9 seconds.
Info: (7) Cleaning up request packet ID 129 with timestamp +508
Info: Ready to process requests.
##
## And the startup
##
Starting - reading configuration files ...
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/acct_unique
including configuration file /usr/local/etc/raddb/mods-enabled/inner-eap
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file /usr/local/etc/raddb/mods-enabled/sql_log
including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/sql
including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf
including configuration file
/usr/local/etc/raddb/mods-enabled/dynamic_clients
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/wimax
including configuration file /usr/local/etc/raddb/mods-enabled/checkval
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/attr_rewrite
including configuration file /usr/local/etc/raddb/mods-enabled/counter
including configuration file /usr/local/etc/raddb/mods-enabled/cui
including configuration file /usr/local/etc/raddb/policy.conf
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/tls
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
main {
security {
allow_core_dumps = no
}
}
including dictionary file /usr/local/etc/raddb/dictionary
main {
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/usr/local/var"
sbindir = "/usr/local/sbin"
logdir = "/usr/local/var/log/radius"
run_dir = "/usr/local/var/run/radiusd"
libdir = "/usr/local/lib"
radacctdir = "/usr/local/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 120
cleanup_delay = 10
max_requests = 2560
pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = yes
auth = yes
auth_badpass = yes
auth_goodpass = yes
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
}
home_server tls {
ipaddr = 127.0.0.1
port = 2083
type = "auth"
proto = "tcp"
secret = "testing123"
response_window = 30
max_outstanding = 65536
zombie_period = 40
status_check = "none"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 300
status_check_timeout = 4
}
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path = "/usr/local/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/certs/client.pem"
certificate_file = "/usr/local/etc/raddb/certs/client.pem"
CA_file = "/usr/local/etc/raddb/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/usr/local/etc/raddb/certs/dh"
random_file = "/usr/local/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
}
realm test.ie {
}
realm dsl.test.ie {
nostrip
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
home_server_pool tls {
type = fail-over
home_server = tls
}
realm tls {
auth_pool = tls
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
proto = "*"
max_connections = 16
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file
/usr/local/etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file
/usr/local/etc/raddb/mods-enabled/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file
/usr/local/etc/raddb/mods-enabled/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file
/usr/local/etc/raddb/mods-enabled/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
modules {
Module: Creating Auth-Type = digest
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file
/usr/local/etc/raddb/mods-enabled/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file
/usr/local/etc/raddb/mods-enabled/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file
/usr/local/etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
passchange {
}
allow_retry = yes
}
Module: Linked to module rlm_digest
Module: Instantiating module "digest" from file
/usr/local/etc/raddb/mods-enabled/digest
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file
/usr/local/etc/raddb/mods-enabled/unix
unix {
radwtmp = "/usr/local/var/log/radius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file
/usr/local/etc/raddb/mods-enabled/eap
eap {
default_eap_type = "ttls"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path = "/usr/local/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/certs/server.pem"
certificate_file = "/usr/local/etc/raddb/certs/server.pem"
CA_file = "/usr/local/etc/raddb/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/usr/local/etc/raddb/certs/dh"
random_file = "/usr/local/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/usr/local/etc/raddb/certs/bootstrap"
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/";
use_nonce = yes
timeout = 0
softfail = yes
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = yes
use_tunneled_reply = yes
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file
/usr/local/etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/usr/local/etc/raddb/huntgroups"
hints = "/usr/local/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_detail
Module: Instantiating module "auth_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail auth_log {
detailfile =
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file
/usr/local/etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file
/usr/local/etc/raddb/mods-enabled/files
files {
usersfile = "/usr/local/etc/raddb/users"
acctusersfile = "/usr/local/etc/raddb/acct_users"
preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
compat = "no"
}
Module: Linked to module rlm_sql
Module: Instantiating module "sql" from file
/usr/local/etc/raddb/mods-enabled/sql
sql {
driver = "rlm_sql_mysql"
server = "localhost"
port = "3306"
login = "radius"
password = "radius"
radius_db = "radius"
read_groups = yes
sqltrace = no
sqltracefile = "/usr/local/var/log/radius/sqltrace.sql"
readclients = yes
deletestalesessions = yes
sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}"
default_user_profile = ""
nas_query = "SELECT id, nasname, shortname, type, secret, server
FROM nas"
authorize_check_query = " SELECT id, username, attribute,
value, op FROM radcheck WHERE username = '%{SQL-User-Name}'
ORDER BY id"
authorize_reply_query = " SELECT id, username, attribute,
value, op FROM radreply WHERE username = '%{SQL-User-Name}'
ORDER BY id"
authorize_group_check_query = " SELECT id, groupname,
attribute, Value, op FROM radgroupcheck WHERE groupname =
'%{Sql-Group}' ORDER BY id"
authorize_group_reply_query = " SELECT id, groupname,
attribute, value, op FROM radgroupreply WHERE groupname =
'%{Sql-Group}' ORDER BY id"
accounting_onoff_query = " UPDATE radacct SET
acctstoptime = '%S', acctsessiontime =
unix_timestamp('%S') - unix_timestamp(acctstarttime),
acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay =
%{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND
nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'"
accounting_update_query = " UPDATE radacct SET
framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
'%{Acct-Session-Time}', acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}', acctoutputoctets =
'%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}'
WHERE acctsessionid = '%{Acct-Session-Id}' AND username =
'%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_update_query_alt = " INSERT INTO radacct
(acctsessionid, acctuniqueid, username, realm,
nasipaddress, nasportid, nasporttype, acctstarttime,
acctsessiontime, acctauthentic, connectinfo_start,
acctinputoctets, acctoutputoctets, calledstationid,
callingstationid, servicetype, framedprotocol,
framedipaddress, acctstartdelay, xascendsessionsvrkey)
VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
'%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S',
INTERVAL (%{%{Acct-Session-Time}:-0} +
%{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}',
'%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '0',
'%{X-Ascend-Session-Svr-Key}')"
accounting_start_query = " INSERT INTO radacct
(acctsessionid, acctuniqueid, username, realm,
nasipaddress, nasportid, nasporttype, acctstarttime,
acctstoptime, acctsessiontime, acctauthentic,
connectinfo_start, connectinfo_stop, acctinputoctets,
acctoutputoctets, calledstationid, callingstationid,
acctterminatecause, servicetype, framedprotocol,
framedipaddress, acctstartdelay, acctstopdelay,
xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
'%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S',
NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '',
'%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',
'%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query_alt = " UPDATE radacct SET
acctstarttime = '%S', acctstartdelay =
'%{%{Acct-Delay-Time}:-0}', connectinfo_start =
'%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND
username = '%{SQL-User-Name}' AND nasipaddress =
'%{NAS-IP-Address}'"
accounting_stop_query = " UPDATE radacct SET acctstoptime =
'%S', acctsessiontime = '%{Acct-Session-Time}',
acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}', acctoutputoctets =
'%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}',
acctterminatecause = '%{Acct-Terminate-Cause}',
acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop
= '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}'
AND username = '%{SQL-User-Name}' AND nasipaddress =
'%{NAS-IP-Address}'"
accounting_stop_query_alt = " INSERT INTO radacct
(acctsessionid, acctuniqueid, username, realm,
nasipaddress, nasportid, nasporttype, acctstarttime,
acctstoptime, acctsessiontime, acctauthentic,
connectinfo_start, connectinfo_stop, acctinputoctets,
acctoutputoctets, calledstationid, callingstationid,
acctterminatecause, servicetype, framedprotocol,
framedipaddress, acctstartdelay, acctstopdelay) VALUES
('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL
(%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND),
'%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '',
'%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Acct-Terminate-Cause}',
'%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',
'0', '%{%{Acct-Delay-Time}:-0}')"
group_membership_query = " SELECT groupname FROM
radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
simul_count_query = ""
simul_verify_query = " SELECT radacctid, acctsessionid,
username, nasipaddress, nasportid, framedipaddress,
callingstationid, framedprotocol FROM radacct WHERE username =
'%{SQL-User-Name}' AND acctstoptime IS NULL"
postauth_query = " INSERT INTO radpostauth (username, pass,
reply, authdate) VALUES ( '%{SQL-User-Name}',
'%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')"
safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to radius@localhost:3306/radius
rlm_sql (sql): Initialising connection pool
pool {
start = 5
min = 0
max = 100
spare = 3
uses = 0
lifetime = 0
cleanup_delay = 5
idle_timeout = 60
}
rlm_sql (sql): Opening additional connection (0)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (1)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (2)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (3)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (4)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (4)
...
all the NAS are loaded here correctly
...
rlm_sql (sql): Released connection (4)
Module: Checking preacct {...} for more modules to load
Module: Loading virtual module acct_unique
Module: Checking accounting {...} for more modules to load
Module: Instantiating module "detail" from file
/usr/local/etc/raddb/mods-enabled/detail
detail {
detailfile =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file
/usr/local/etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/usr/local/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.accounting_response" from
file /usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "reply_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail reply_log {
detailfile =
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_wimax
Module: Instantiating module "wimax" from file
/usr/local/etc/raddb/mods-enabled/wimax
wimax {
delete_mppe_keys = yes
}
Module: Loading virtual module remove_reply_message_if_eap
Module: Linked to module rlm_always
Module: Instantiating module "noop" from file
/usr/local/etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
Module: Instantiating module "attr_filter.access_reject" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
}
Module: Loading virtual module remove_reply_message_if_eap
} # modules
} # server
server inner-tunnel { # from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
thread pool {
start_servers = 5
max_servers = 32
min_spare_servers = 3
max_spare_servers = 10
max_requests_per_server = 0
cleanup_delay = 5
max_queue_size = 65536
}
Thread spawned new child 1. Total threads in pool: 1
Thread spawned new child 2. Total threads in pool: 2
Thread spawned new child 3. Total threads in pool: 3
Thread spawned new child 4. Total threads in pool: 4
Thread spawned new child 5. Total threads in pool: 5
Thread pool initialized
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
Thread 5 waiting to be assigned a request
Thread 4 waiting to be assigned a request
Thread 3 waiting to be assigned a request
Thread 2 waiting to be assigned a request
}
listen {
type = "acct"
ipaddr = *
port = 0
Thread 1 waiting to be assigned a request
}
listen {
type = "auth"
ipaddr = *
port = 2083
proto = "tcp"
max_connections = 64
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path = "/usr/local/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/certs/server.pem"
certificate_file = "/usr/local/etc/raddb/certs/server.pem"
CA_file = "/usr/local/etc/raddb/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/usr/local/etc/raddb/certs/dh"
random_file = "/usr/local/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
require_client_cert = yes
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
}
}
clients = "radsec"
client 127.0.0.1 {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
proto = "tcp"
max_connections = 16
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 4000
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on authentication proto tcp address * port 2083 (TLS)
Listening on authentication address 127.0.0.1 port 4000
Listening on authentication address 127.0.0.1 port 18120 as server
inner-tunnel
Opening new proxy address * port 1814
Listening on proxy address * port 1814
Ready to process requests.
http://www.livelinx.tv/
NEW! See our Ka Uplink Van at IBC in Amsterdam; Stand OE 117, September 7-11,
2012
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
