On 17/01/13 11:29, Tiago wrote:
Hello everyone,
I'm struggling with something that should be simple to fix.
I have a rp-pppoe NAS server here that correctly understand a few
attributes (radreply) that come from freeradius 1.x (w/mysql
database). Example:
Download (for download rates) attribute
Simple real example, from pppoe server:
# cat /var/run/radattr.ppp479
....
Framed-Compression Van-Jacobson-TCP-IP
Framed-Protocol PPP
Framed-MTU 1500
Download 12000
Upload 3072
"Download" and "Upload" aren't standard attributes. Where are these
defined in "dictionary" files?
Sending Access-Accept of id 192 to NASPPPOE01 port 48956
Framed-Protocol = PPP
Framed-Compression = Van-Jacobson-TCP-IP
Cliente =
"\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000"
Framed-MTU = 1500
WISPr-Bandwidth-Max-Down = 256000
WISPr-Bandwidth-Max-Up = 256000
Finished request 0.
Going to the next request
What I'm missing? it seems like the attributes are not being sent to
NAS, but I could be wrong
Correct.
Check the attributes are actually defined in a dictionary on the 2.x
installation; check raddb/dictionary on the 1.x installation, see if
they were defined as custom VSAs or similar.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
