Kristian Kielhofner wrote: > The Soekris net5501 and standard case will (I believe) take a full > height card. Then again you could use any board and get an external > SIP gateway (ATA). We don't currently support OpenZAP with FS in > AstLinux but I'd love to add support for it eventually. >
Ok, I found this: <http://www.soekris.com/net5501.htm>. It looks like room for a full height card. 4 network adaptors for a Freeswitch box. Hmmm. Suspect I would only find use for one ;-) Lack of OpenZAP support might be an issue, I assume that would be required to connect to an onboard analogue port... I assume I could just install Debian or another distribution instead though. Does this require a hard disk drive to boot Linux? I am guessing that compact flash could be used instead. Alternatively, if I used an external ATA, what is a good one to use? I think Jason has already made a suggestion, if so I have forgotten. I guess I get nervous going down this approach because it will add to the latency, but then again it won't use so much CPU power either, and the Digium cards send a lot of time-critical interrupts. > I'm currently working with the FS devs on getting some issues in > trunk resolved to get cross compiling working again. Until then you > can find ISOs with FreeSWITCH and AstLInux here if you'd like to check > it out: I am curious, how do you install ISOs onto a box like the net5501? I don't see any provision for CD-ROM drives. -- Brian May <br...@microcomaustralia.com.au> _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org