Thanks Guys I'll look into this one. - David
On 08/10/15 23:53, Peter Reichelt wrote: > I have been testing the voice keyer using the FREEDV V1.1 GUI and an SM1000 > for receiving and it works perfectly EXCEPT if I tx from the SM1000 during > the reception period the voice keyer does not stop even if a valid signal has > been synced and received for greater than 20 secs. In fact FREEDV will > happily TX over the incoming signal even though it has been in sync greater > than 20 secs. > > This is contrary to the info on David's Blog at > http://www.rowetel.com/blog/?p=4593 , which states "It also stops if it > detects a valid FreeDV sync for 5 seconds, to avoid congesting the band if > others are using it." > > My S/N Ratio has been greater than 20 dB and the program happily decodes > audio from SM1000 > > Anybody else seen this issue? > > Peter VK5APR > > ------------------------------------------------------------------------------ > _______________________________________________ > Freetel-codec2 mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 > ------------------------------------------------------------------------------ _______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
