Ok,
Slightly modified SM1000 code. Basically all menu functions removed so it only powers up in DV mode. GPIO pins changed to a few different pins and DAC1/2 transposed. ADC's have not been changed because there is no easy way of doing that. Appears to modulate fine. Decode/RX has a good solid RT LED but anywhere from 3-20 seconds after RT light coming on during a receive of a good signal. (ie this mornings broadcast) The ERR LED stars flashing frantically like almost solid on. Audio becomes garbage. 25% of the time it will recover after 10-20 seconds other times I get frustrated and need to PTT, power cycle or hit the reset. Then it is almost instantly up and running fine again. I noticed this originally when running audio from the PC directly into the modem and thought it may be because the computer is glitching as its quite a slow computer. I expect glitches to happen but I am not sure on causes of lack of recovery. Have tested at various levels and this does not seem to effect it. Any thoughts? Or has any one seen this before? Cheers Eric
------------------------------------------------------------------------------
_______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
