I was thinking you might target it as the LPCnet project.
as you know you can use a C1+ at half the money and one quarter the
input power to do all the other codec2 modem/workloads...
the S922X chip is a 12nm node, seems to do better under thermal loads
compared to the rk3399 (28nm I think)
although in the rk3399 is no slouch. Odroid have alwayts been great with
their OS and driver support and excellent community.
and it is 7 to 20V input. and comes with the chassis...
the only odd thing about the N2 is that at the monent there is a 64 bit
kernel and 32 bit user land.
If the SW you are trying to run compile is written for 64 bit then that
is going to be trouble I think.
same goes ont ghe Rasp Pie 3 I think.
g
On 26/06/2019 4:16 PM, Al Beard wrote:
Thanks Glen for the update,
Odroid N2
*Software support*
*Linux*
Two Ubuntu 18.04 LTS images are available with Kernel version *4.9.162
* LTS as of today. This kernel version will be officially supported
until Jan, 2023.
The mainline Linux kernel is at 5.0.9 and this is running *now* on my
lowly Banana Pi M2 Berry boards.
Linux berry2 5.0.9-301.fc30.armv7hl
The Odroid N2 board price is well within my "budget".
In the end, all I want is a portable, low power box to run FreeDV in
2020 and any subsequently developed modes.
Digital Repeaters very much in my mind.
Alan VK2ZIW
On Wed, 26 Jun 2019 15:23:01 +1000, glen english wrote
> Alan
>
> I have a couple of RK3399s boards...if you are looking for some...
> using them on a big project- they are fast.
>
> they're all FireFly boards
>
> HOWEVER
>
> starting now, the RK3399 is old hat, I think it is the wrong path
> for a new project.
>
> suggest the new Odroid N2 with the new AMlogic with quad A73s (and
> dual A53)
>
> I can tell you, it beats the hell out of the RK3399 . it wipes the
> floor and has its way with it.
>
> https://www.hardkernel.com/shop/odroid-n2-with-4gbyte-ram/
>
> you can get a cheaper, smaller RAM version, also.
>
> -glen
>
> On 26/06/2019 3:14 PM, Al Beard wrote:
> > Hi all,
> >
> > The aarch64 *puma-RK3399* board, I emailed and asked:
> >
> > I would like:
>
> _______________________________________________
> Freetel-codec2 mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/freetel-codec2
---------------------------------------------------
Alan Beard
OpenWebMail 2.53
_______________________________________________
Freetel-codec2 mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freetel-codec2
_______________________________________________
Freetel-codec2 mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freetel-codec2
