Hmm, that is strange that it would not show up for you.
As I flashed my sm1000 with Linux, as well as Windows back and forth to test the upload with Linux, download with Windows, then an upload with Windows of the firmware. Yes I do have a few of us using 2020 mode over here. It really sounds great.. Walter/K5WH From: [email protected] <[email protected]> Sent: Tuesday, July 16, 2019 10:08 AM To: [email protected] Subject: Re: [Freetel-codec2] sm1000 and FreeDV 700D Hi Walter, Yes, I did hold the PTT button down while turning on. I get the sign, that a USB device is present, but it could not be recognized an therefore no driver associated. When I start DfuSeDemo there is no device. When I check hardware I see a UDB device without driver. If I do not press PTT when switching on, there is nothing. Btw, do you have allready mode2020 running? 73's Gerhard Am 16.07.2019 17:00, schrieb [email protected] <mailto:[email protected]> : Gerhard, Did you hold the PTT button in while turning the sm1000 on? There are no drivers to be loaded. As it should just come right up once you power it on in the DFU mode. Walter/K5WH From: [email protected] <mailto:[email protected]> <[email protected] <mailto:[email protected]> > Sent: Tuesday, July 16, 2019 7:53 AM To: [email protected] <mailto:[email protected]> Subject: Re: [Freetel-codec2] sm1000 and FreeDV 700D Hi David, Great work! But I cannot connect the SM1000 to my Win7 PC as the correct USB device is not detected and no driver loaded. Also automatic search for a driver doesn't work. Which driver is has to be used? 73's Gerhard OE3GBB Am 15.07.2019 23:41, schrieb David Rowe: Further to the below, the SM1000 page has been updated: http://www.rowetel.com/sm1000.html and a new manual: https://github.com/drowe67/codec2/blob/master/stm32/doc/sm1000_manual.md Includes details of how to upgrade to the V2 firmware that includes FreeDV 700D. - David On 09/07/19 07:08, David Rowe wrote: For some time now, a group of us, in particular Don, (W7DMR) have been working on a 700D port to the SM1000: http://www.rowetel.com/?p=6725 I've been working on the finishing touches, integrating the 700D mode with Stuart's (VK4MSL) fine menu system. I now have the SM1000 running 700D (and 1600 and analog modes) on my bench, decoding recordings of off-air samples. Works well and is stable. Tx works as well. Still some polishing to do, but the current code is here: https://github.com/drowe67/codec2/pull/42 -/- We now have around 50 automated tests in the codec 2 repo, covering x86 and the stm32 port. There's also been some improvements to 700D sync (+/- 60Hz, more robust and faster on fading channels). Cheers, David _______________________________________________ Freetel-codec2 mailing list [email protected] <mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/freetel-codec2 _______________________________________________ Freetel-codec2 mailing list [email protected] <mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/freetel-codec2 _______________________________________________ Freetel-codec2 mailing list [email protected] <mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/freetel-codec2
_______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
