Dear Ammar, Codec2 in the project SM1000 is implemented on STM32F MCU family, which have between 96KB and 386KB of Ram and CPU clock of 96MHz to 180MHz. The question can be, does SM1000 have external RAM? If no, how much Ram does the MCU have inside?
On Sat, Nov 2, 2019 at 3:06 PM Ammar Ahmad Khan <[email protected]> wrote: > Hi there Sam. I think your properties are not enough . I tried this on DSP > DSK6713 Kit also. I came to conclusion that it will require something with > minimum 1GB RAM with a good speed. And If you want real time action, using > interrupts is an option > > On Sun, Nov 3, 2019 at 3:03 AM Sam Shoja <[email protected]> wrote: > >> Hi All Codec2 developers! >> I am trying to port Codec2 on Cypress PSOC 6 with 288KB of RAM and 100MHz >> clock on Arm cortex M4; however, it seems codec2 is running out of memory >> on this MCU. I was wondering what the minimum requirement of RAM and CPU >> are for codec2? On the project SM1000 it was mentioned that the MCU is >> STM32F and as I searched this is family of MCUs with different sizes of RAM >> and CPU clock. I am wondering which MCU from STM32F family is being used in >> SM1000. >> >> Thanks for you time and consideration. >> >> -- >> Sam >> _______________________________________________ >> Freetel-codec2 mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/freetel-codec2 >> > _______________________________________________ > Freetel-codec2 mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 > -- Sam
_______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
