That should be available in its datasheet. But when I ran only the encoding part on a DSP kit, it took around 200KB.
On Sun, Nov 3, 2019 at 3:13 AM Sam Shoja <[email protected]> wrote: > Dear Ammar, > > Codec2 in the project SM1000 is implemented on STM32F MCU family, which > have between 96KB and 386KB of Ram and CPU clock of 96MHz to 180MHz. > The question can be, does SM1000 have external RAM? If no, how much Ram > does the MCU have inside? > > On Sat, Nov 2, 2019 at 3:06 PM Ammar Ahmad Khan <[email protected]> > wrote: > >> Hi there Sam. I think your properties are not enough . I tried this on >> DSP DSK6713 Kit also. I came to conclusion that it will require something >> with minimum 1GB RAM with a good speed. And If you want real time action, >> using interrupts is an option >> >> On Sun, Nov 3, 2019 at 3:03 AM Sam Shoja <[email protected]> wrote: >> >>> Hi All Codec2 developers! >>> I am trying to port Codec2 on Cypress PSOC 6 with 288KB of RAM and >>> 100MHz clock on Arm cortex M4; however, it seems codec2 is running out of >>> memory on this MCU. I was wondering what the minimum requirement of RAM and >>> CPU are for codec2? On the project SM1000 it was mentioned that the MCU is >>> STM32F and as I searched this is family of MCUs with different sizes of RAM >>> and CPU clock. I am wondering which MCU from STM32F family is being used in >>> SM1000. >>> >>> Thanks for you time and consideration. >>> >>> -- >>> Sam >>> _______________________________________________ >>> Freetel-codec2 mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/freetel-codec2 >>> >> _______________________________________________ >> Freetel-codec2 mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/freetel-codec2 >> > > > -- > Sam > _______________________________________________ > Freetel-codec2 mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 >
_______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
