tor 2020-06-04 klockan 23:16 +0200 skrev Jeroen Vreeken: > On 06/02/2020 12:12 AM, David Rowe wrote: > > Hi Jeroen, > > > > I place code that requires updates in: > > > > void MainFrame::OnTimer(wxTimerEvent &evt) > > > > ...with various methods for maintaining state (like global pointers and > > member variables). > > > > That works. > I now have a freedv-gui version with working tx. Besides during regular > user initiated transmissions, it can also key for data only transmission > when packets are received on the interface. So just leave the gui > running in the 'start' state and you have a fully functional packet > radio setup. > I could not test the receive side yet, it took me a while this evening > to figure out that in case of a stereo signal only the left channel is > used. My discriminator output hapened to be connected to the right > channel... > So I'll have to try again with the wires swapped.
This sounds very promising. The real test is getting RX going and getting error-free packets through :) Do you have any FEC or checksum? /Tomas _______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
