Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification.
The following page has been changed by Schilling, Daniel: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage ------------------------------------------------------------------------------ @@ -320,29 +320,6 @@ === dxr3 === See the Dxr3Page for information about that board. -There is support for the dxr3 card by "Creative Labs" (aka. "Hollywood Plus" by "Sigma Designs") -in the current release of "freevo". - -You need, however, support for the dxr3 in your libSDL, too. First attemps to add dxr3 to libSDL -were done by Michael Hunold using the "fame" mpeg-encoder. You can find this attempts at -http://www-c.informatik.uni-hannover.de/~hunold1/dxr3/sdl/ - -Please don't use this code any more, it's outdated and not maintained any more -- it's just still -there for completeness. - -This support has lately been improved by Jens Axboe, he switched to the very populoar "libavcodec" -mpeg-encoder, too. Have look at the mailing list archives for the latest version of his patch or -send a mail to the mailing list. - -If you compiled and installed this new version of libSDL, you should configure "freevo" to use -the dxr3 as an output device, for example like this: - -"./configure --display=dxr3 --geometry=640x480 --tv=pal", then do a "make". - -Now you are ready to start it with "./freevo". Good luck and have fun! - -For further questions, ask on the mailing list. - === Nvidia === See the NvidiaPage for information. ------------------------------------------------------- This SF.net email is sponsored by: The Definitive IT and Networking Event. Be There! NetWorld+Interop Las Vegas 2003 -- Register today! http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en _______________________________________________ Freevo-wikilog mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-wikilog
