Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification.
The following page has been changed by 198.108.220.9: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage ------------------------------------------------------------------------------ @@ -373,12 +373,14 @@ === ATI All-in-Wonder Models === -need someone to fill this in. +Check out [http://gatos.sourceforge.net the Gatos website] for information on the All-in-Wonder cards. They have incredible support for even the really really old All-in-Wonder cards. NOTE: ALL of the All-in-Wonder cards, even the original 4MB one will give DVD hardware acceleration if you use the Gatos drivers. It's worth the effort if you have one of the oldies. +== Remote Controls == +As far as I can tell, there is no way to get lirc to work without recompiling kernel. I *just* read below that doing a "make dep" might be enough, but if you're already that far -- you might as well recompile and install a custom kernel. (especially if you're kernel is compiled for i386, you can optimize for pentium or athlon, etc) ALSO, make sure you get the source tarball of lirc, and that you dont' have an RPM or DEB installed of it on your computer. (They don't work, at least not for me the 5-10 times I've tried) -== Remote Controls == +Read the section on the ATI remote part -- most of the instructions are applicable even if you aren't using that specific receiver. === Streamzap USB Remote === This wonderful remote is available from thinkgeek.com and actually I bought mine at my local CompUSA. The remote is USB and works very nicely with the Streamzap patch to the lirc project. ------------------------------------------------------- This SF.NET email is sponsored by: eBay Great deals on office technology -- on eBay now! Click here: http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 _______________________________________________ Freevo-wikilog mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-wikilog
