Justin Wetherell wrote: > I haven't tried it with a newer version of the SVN yet but I will when I > get home. Has anything been done in the code to address this? I feel > like I should haven't to adjust my current setup for it to work, since > it worked fine in 1.5.4 but I will if you feel it's needed.
You may need to for the PVR-350, if you have updated the kernel and so the ivtv driver, the tuner has moved from number 4 to 0. I don't know which version it changed somewhere between 0.4.7 and 0.8.0. VideoGroup has lost the recordable setting, so it need deleting, you can do this with: freevo convert_config I you still have a problem, you need to post the VIDEO_GROUPS section of local_conf.py, TV card type, ivtv driver version. Cheers, Duncan > > On 10/25/06, *Duncan Webb* <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>> wrote: > > SourceForge.net wrote: > > Bugs item #1582577, was opened at 2006-10-22 23:07 > > Message generated for change (Comment added) made by ehisey > > You can respond by visiting: > > > > https://sourceforge.net/tracker/?func=detail&atid=446895&aid=1582577&group_id=46652 > > <https://sourceforge.net/tracker/?func=detail&atid=446895&aid=1582577&group_id=46652> > > Justin, have you resolved this problem? > > > > > > Please note that this message will contain a full copy of the > comment thread, > > including the initial issue submission, for this request, > > not just the latest update. > > Category: program guide > > Group: None > > Status: Open > > Resolution: None > > Priority: 5 > > Private: No > > Submitted By: Justin Wetherell (phishman3579) > > Assigned to: Nobody/Anonymous (nobody) > > Summary: Crashes while watching TV > > > > Initial Comment: > > While trying to select a program to watch from the > > guide, it crashes with this error: > > > > USING STANDARD FREQUENCY: chan="2", freq="55250" > > Video Opened at /dev/video0 > > Traceback (most recent call last): > > File "/usr/local/src/freevo-1.6/src/main.py", line > > 321, in eventhandler > > app.eventhandler(event) > > File "/usr/local/src/freevo-1.6/src/menu.py", line > > 425, in eventhandler > > if not isinstance(menu, Menu) and > > menu.eventhandler (event): > > File "/usr/local/src/freevo-1.6/src/tv/tvguide.py", > > line 211, in eventhandler > > self.player('tv', self.selected.channel_id) > > File "/usr/local/src/freevo-1.6/src/tv/tvmenu.py", > > line 100, in start_tv > > plugin.getbyname(plugin.TV).Play(mode, tuner_id) > > File > > "/usr/local/src/freevo-1.6/src/tv/plugins/ivtv_xine_tv.py", > > line 95, in Play > > self.tuner.SetChannel(self.mode, tuner_channel) > > File > > "/usr/local/src/freevo-1.6/src/tv/plugins/ivtv_xine_tv.py", > > line 220, in SetChannel > > ivtv_dev.setvbiembed(0) > > File "/usr/local/src/freevo- 1.6/src/tv/ivtv.py", line > > 168, in setvbiembed > > r = fcntl.ioctl(self.device, i32(SETVBI_EMBED_NO), > > struct.pack(VBI_EMBED_ST, value)) > > IOError: [Errno 22] Invalid argument > > osd.py (211): Couldnt load font "Arial_Bold.ttf" > > osd.py (217): trying alternate: verabd.ttf > > ivtv_xine_tv.py (120): 1161558139.5: tv app got > > INPUT_ENTER event > > Crash! > > Traceback (most recent call last): > > File "/usr/local/src/freevo-1.6/src/main.py", line > > 498, in ? > > MainTread().run() > > File "/usr/local/src/freevo-1.6/src/main.py", line > > 358, in run > > self.eventhandler(rc.get_event(True)) > > File "/usr/local/src/freevo-1.6/src/main.py", line > > 308, in eventhandler > > if not rc.app()(event): > > File > > "/usr/local/src/freevo- 1.6/src/tv/plugins/ivtv_xine_tv.py", > > line 138, in eventhandler > > self.tuner.TuneChannel( int(s_event[6]) ) > > ValueError: invalid literal for int(): E > > > > > > > ---------------------------------------------------------------------- > > > > Comment By: ehisey (ehisey) > > Date: 2006-10-25 08:16 > > > > Message: > > Logged In: YES > > user_id=1021609 > > > > Use lspci to confirm that you are using an ivtv compatible > > card. I was getting this crash think my hauppauge card was a > > pvr 150, when this paticular car was actually a WinTV GO card. > > > > You could also use lsmod to see if the bttv drivers are > > loading. > > > > ---------------------------------------------------------------------- > > > > Comment By: Duncan Webb (duncanwebb) > > Date: 2006-10-23 05:10 > > > > Message: > > Logged In: YES > > user_id=104395 > > > > Need some more information about your system. > > kernel version, ivtv version and tv card. > > > > I know that the tv card is a pvr-350. Between drivers 0.4.x > > and 0.8.x the tuner number has moved from 4 to 0. > > setvbiembed call is not very forgiving when the wrong input > > is used. > > > > ivtvctl -nP list the input and the current setting and my > > local_conf.py has: > > TV_DRIVER = 'v4l2' > > TV_DEVICE = '/dev/video0' > > TV_INPUT = 4 > > and > > VideoGroup(vdev='/dev/video0', > > adev='/dev/adsp', > > input_type='tuner', > > input_num=4, > > tuner_norm=CONF.tv, > > tuner_chanlist=CONF.chanlist, > > desc='PVR-350 Video Group', > > group_type='ivtv', > > record_group=None), > > > > AFAIK The videogroup setting overrides the earlier TV settings. > > > > ---------------------------------------------------------------------- > > > > Comment By: Richard van Paasen (rvpaasen) > > Date: 2006-10-23 01:18 > > > > Message: > > Logged In: YES > > user_id=182311 > > > > Or, did you add INPUT_ENTER to the TV_EVENTS ? > > > > I couldn't reproduce this bug. > > > > > > ---------------------------------------------------------------------- > > > > Comment By: Richard van Paasen (rvpaasen) > > Date: 2006-10-23 01:07 > > > > Message: > > Logged In: YES > > user_id=182311 > > > > Is your lirc setup correctly? It is probably sending > > repeating ENTER events when you press the button once. You > > should set repeat=0 in the lirc config, e.g.: > > > > begin > > prog = freevo > > remote = pvr > > button = enter > > config = ENTER > > repeat = 0 > > end > > > > Apart from that, doing " self.tuner.TuneChannel( > > int(s_event[6]) )" without checking for a valid char is the > > bug that causes a crash. > > > > Have to fix this. > > > > > > > ---------------------------------------------------------------------- > > > > You can respond by visiting: > > > > https://sourceforge.net/tracker/?func=detail&atid=446895&aid=1582577&group_id=46652 > > <https://sourceforge.net/tracker/?func=detail&atid=446895&aid=1582577&group_id=46652> ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Freevo-devel mailing list Freevo-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-devel
