Pirlouwi wrote: > Indeed... > Meanwhile, have I uncommented the option: TV_RECORD_SCHEDULE > and modified vdev from /dev/video0 (which is a device from my Hauppauge > Wintv-go card) to /dev/dvb value. I don't know if this is right, but it > seems logical, and this is the only reference inside /dev about > something relative to dvb. > Now I am able to place record schedules, although i get from time to > time the same error than before, but when i retry just after, it works > (apparently). > The next problem now is that the scheduled recording is timed 12 hours > before. I program to record a broadcasting that start at 23:20 for > example, and it is written in the freevo GUI that it is going to start > at 11.20. What should I configure to correct that in local_conf.py?
There is not configuration in freevo for the time, most likely the problem is your timezone setting in your linux distro set-up. > BTW: no info in the wiki about VIDEO_GROUPS keyword. You need to use Find Page->Full Text Search->VIDEO_GROUPS and there are seven hits. Including a DVB section. Duncan > LOUIS > > 2007/5/16, Duncan Webb < [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>>: > > Pirlouwi wrote: > > Have you tried a search for VIDEO_GROUPS in the freevo wiki? > This is the > > first place to start. > > > > You will need to check what the correct tuner is for the TV, > possible > > called Television or Tuner. Try: > > v4l2-ctl --list-inputs > > This will list the inputs for the video device and then you > set the > > input_num to be correct for you device, 0 is usually correct. > > > > The v4l2-ctl is part of the ivtv driver but works with all > v4l2 devices. > > > > Duncan > > > > > > Here is the result of the v4l2-ctl command: > > $ v4l2-ctl --list-inputs > > ioctl: VIDIOC_ENUMINPUT > > Input : 0 > > Name : Television > > Type : 0x00000001 > > Audioset: 0x00000001 > > Tuner : 0x00000000 > > Standard: 0x0000000000FFBFFF ( PAL NTSC SECAM ) > > Status : 256 > > > > Input : 1 > > Name : Composite1 > > Type : 0x00000002 > > Audioset: 0x00000001 > > Tuner : 0x00000000 > > Standard: 0x0000000000FFBFFF ( PAL NTSC SECAM ) > > Status : 0 > > > > Input : 2 > > Name : S-Video > > Type : 0x00000002 > > Audioset: 0x00000001 > > Tuner : 0x00000000 > > Standard: 0x0000000000FFBFFF ( PAL NTSC SECAM ) > > Status : 0 > > > > Input : 3 > > Name : Composite3 > > Type : 0x00000002 > > Audioset: 0x00000001 > > Tuner : 0x00000000 > > Standard: 0x0000000000FFBFFF ( PAL NTSC SECAM ) > > Status : 0 > > > > > > I only see data of my Wintv-go tuner card. I do not see any > information > > about my Freecom DVB USB stick. > > > > What should I do to know the correct setting to put inside the > > VIDEO_GROUPS array of freevo? > > Is there a similar command for dvb material? > > The possible group_type are: > 'ivtv', 'webcam', 'dvb', 'tvalsa', 'normal' > When the type is something else then normal is used. > > I believe that you need to select group_type='dvb' in VIDEO_GROUPS and > set the TV_CHANNELS in local_conf.py. > > As far as I can tell only the mplayer tv plug-in supports dvb. > > Hopefully someone with a dvb card or stick can help you further. > > When you succeed and I'm sure you will may be you can update the wiki > page for the Freecom DVB stick. > > Duncan > > ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
