> Hi Andreas
>
> That was easy to change and it works now. Thanks for your support.
>
> The only problem is that the volume is very very low playing radio this
> way. Any idea?
Yes. (what card do you have? you have ecactly the same problems than with my
ivtv based card!) I do not know why, but the volume is ca. 8 times lower than
the normal sound.
I fixed it useing the attached /etc/asound.conf and the following:
RADIO_CMD = '/usr/bin/ivtv-radio -d /dev/radio0 -i /dev/video24 -c "aplay -f
dat -D ukwradio < %s"'
I do not know if this is the propper way. In my case I think the problem is in
the ivtv driver...
Andreas
>
> Thans and regards
> Markus
>
>
> Andreas Dick schrieb:
>>> '$ mplayer radio://106.55' gives no sound :-(
>> then you have the same situation as I have.
>>
>>> The configuration with radio.fxd similar to the webradio.fxd looks
>>> good.
>>> But when I start to play a radio station freevo says:
>>> 'Cannot play with RadioPlayer - no station'
>>>
>>> This is an extract from the radio.fxd:
>>> <?xml version="1.0" ?>
>>> <freevo>
>>> <container title="Alternative">
>>> <audio title="Couleur3">
>>> <cover-img>radiologos/Couleur
>>> 3.png</cover-img>
>>> <url>radio://106.55</url>
>>> <station>106.55</station>
>>> <player>radioplayer</player>
>>> </audio>
>>> ....
>>>
>>> Extract from local_conf.py:
>>> plugin.activate('audio.radioplayer')
>>> RADIO_CMD = '/usr/bin/ivtv-radio -d /dev/radio0 -i /dev/video24'
>>> RADIO_STATIONS = [
>>> ('Couleur 3', '106.55')
>>> ]
>>>
>>>
>>> As you can see I tried some different configurations - without success.
>>> I'm not using the lates svn version but freevo 1.8.0 from the official
>>> sources.
>> This is the reason: My patch is very new and not in 1.8.0 ... try to use
>> svn or wait to the next release. Or if you want to apply the patch to
>> 1.8.0, here you find the patch and some discussion about the
>> problematic:
>>
http://sourceforge.net/tracker/index.php?func=detail&aid=1962450&group_id=46652&atid=446898
>> (the patch adds only one code line, you could apply it easily by hand)
>>
>> Andreas
>>
>>> Markus
>>>
>>> Andreas Dick schrieb:
>>>> Am Mittwoch, 14. Mai 2008 21.28:19 schrieb Markus Wittenberg:
>>>>> Hi
>>>>>
>>>>> It's easy to show radio station images for webradio, because it can
>>>>> be
>>>>> configured within the 'webradio.fxd'.
>>>>>
>>>>> But is it also possible to have radio station images for the
>>>>> audio.radio
>>>>> plugin? Usually I just can configure the station name and the
>>>>> frequency
>>>>> within local_conf.py
>>>>>
>>>>> RADIO_STATIONS = [
>>>>> ('Couleur 3', '106.55')
>>>>> ]
>>>>>
>>>>> Can I also configure a station image somehow?
>>>> The easiest could be to use the webradio.fxd file as well for the
>>>> radio
>>>> instead of the radio plugin. try to use:
>>>> <url>radio://106.55</url>
>>>> but this works only if the command line
>>>> $ mplayer radio://106.55
>>>> works in your setup. if not, you could try to use the newest svn, then
>>>> you can
>>>> use
>>>> <player>radioplayer</player>
>>>> <station>106.55</station>
>>>> in your fxd file. You have also to activate the radioplayer plugin
>>>> (not
>>>> the
>>>> radio plugin) and also you have to configure RADIO_CMD
>>>>
>>>> good luck
>>>> Andreas
>>>>
>>>>> Thanks and regards
>>>>> Marku
>>>>>
>>>>> -------------------------------------------------------------------------
>>>>> This SF.net email is sponsored by: Microsoft
>>>>> Defy all challenges. Microsoft(R) Visual Studio 2008.
>>>>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>>>>> _______________________________________________
>>>>> Freevo-users mailing list
>>>>> Freevo-users@lists.sourceforge.net
>>>>> https://lists.sourceforge.net/lists/listinfo/freevo-users
>>>>
>>>>
>>>> -------------------------------------------------------------------------
>>>> This SF.net email is sponsored by: Microsoft
>>>> Defy all challenges. Microsoft(R) Visual Studio 2008.
>>>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>>>> _______________________________________________
>>>> Freevo-users mailing list
>>>> Freevo-users@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/freevo-users
>>>>
>>>
>>> -------------------------------------------------------------------------
>>> This SF.net email is sponsored by: Microsoft
>>> Defy all challenges. Microsoft(R) Visual Studio 2008.
>>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>>> _______________________________________________
>>> Freevo-users mailing list
>>> Freevo-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/freevo-users
>>>
>>
>>
>>
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by: Microsoft
>> Defy all challenges. Microsoft(R) Visual Studio 2008.
>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>> _______________________________________________
>> Freevo-users mailing list
>> Freevo-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/freevo-users
>>
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Freevo-users mailing list
> Freevo-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/freevo-users
>
# volume corrections for ukw radio
pcm.ukwradio
{
type plug
slave.pcm ukwradio_vol
}
pcm.ukwradio_vol
{
type route
slave.pcm front
slave.channels 2
ttable.0.0 8
ttable.0.1 8
}
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
